ASaP turns a new page and replaces Ametek!

woman engineer looking at maintenance tablet Predictive maintenance software & analyzer data collection - AIM

Now, we have selected a whole range of new, high-quality, and innovative products to gradually replace the Ametek range that we have supplied in the past 20 years, while maintaining the highest standard of service on your installed base. You are invited to contact our analyzer specialists for more information and/ or a demonstration of our new analyzers. Follow us on LinkedIn and read our newsletter to stay informed on the full range of analyzers we offer to suit your needs.

Sulfur Recovery Tail Gas Analyzer, The Ametek Model 888

Sulfur Recovery Tail Gas Analyzer, The Ametek Model 888 photo

The Ametek Model 888 Sulfur Recovery Tail Gas Analyzer, the successor of the 880 NSL uses field-proven and highly reliable UV technology to accurately monitor the H2S and SO2 concentrations in sulfur recovery tail gas. This compact, rugged analyzer mounts directly on the process pipe, eliminating the complexity and safety issues of fiber optic coupled photometers.

Ametek 5100HD TDLAS dual laser gas analyzer

Dual laser gas analyzer Ametek Model 5100 HD

The Ametek 5100HD TDLAS Gas Analyzer is based on Tunable Diode Laser Absorption Spectroscopy (TDLAS). The dual laser gas analyzer Ametek 5100HD TDLAS hosts a dual laser platform. Two separate lasers are installed in the instrument, sharing a common optical path through the sample, enabling the measurement of two analytes simultaneously. This results in significant …

Read more

Ametek Model WDG-V Zone 1 combustion analyzer

Ametek Thermox WDG-V ZONE 1 EXd Combustion Analyzer

The Ametek Model WDG-V Zone 1 combustion analyzer has been third-party certified for Zone 1 hazardous locations, allowing the unit to operate in areas in which hazardous vapors and gases will continuously be present. The Ametek Model WDG-V Zone 1 combustion analyzer offers a complete solution for combustion process control and safety with redundancy and …

Read more

Ametek WDG-V Combustion Analyzer

Ametek Thermox WDG-V Combustion Analyzer

Why the need for an Ametek WDG-V Combustion Analyzer? The reliable identification of low combustion oxygen in a fired heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety. Ametek WDG-V Combustion Analyzer for increased efficiency and emission reductions Low emission burners and aggressive firing …

Read more

Ametek WDG 1200 and 1210 Insitu flue gas analyzers

Ametek Thermox WDG 1200-1210 Flue Gas Oxygen Analyzers

The Ametek WDG 1200 and 1210 Insitu flue gas analyzers are rugged, reliable flue gas oxygen analyzers for net oxygen that use industry-proven zirconium oxide sensor technology. The outer probe tube is 310 stainless steel so no abrasion shield is needed for most applications. The controller features precision temperature control for optimum stability, built-in diagnostics, …

Read more

Ametek 900 Tail Gas-Air Demand Analyzer

Ametek 900 Tail Gas-Air Demand Analyzer

The Ametek 900 Tail Gas-Air Demand Analyzer was specifically designed to meet the more demanding analytical requirements of new processes. Used in conjunction with the ASR 900 sampling probe, which provides trouble-free sampling, the Ametek 900 Tail Gas-Air Demand Analyzer ensures maximum data availability for optimum operation of all sulfur recovery processes. Using high-resolution ultraviolet …

Read more

Ametek 241CE II Hydrocarbon Dew Point Analyzer

Ametek 241

The Ametek 241CE II Hydrocarbon Dew Point Analyzer is a quality control tool for natural gas processing, distribution, and consumption. Detection and measurement of hydrocarbon dewpoint is achieved in a single cell, single cycle operation. Ametek 241CE II Hydrocarbon Dew Point Analyzer APPLICATIONS Ametek 241CE II Hydrocarbon Dew Point Analyzer BENEFITS  Ametek 241CE II Hydrocarbon …

Read more

Ametek 881NSL sulfur pit analyzer

The Ametek 881NSL sulfur pit analyzer has no costly troublesome external sample line. The analyzer mounts directly on your sulfur pit lid, eliminating sample line plugging, the number one problem in Claus Plant analysis. The Ametek 881NSL sulfur pit analyzer photometer combines an extraordinary long lamp life (estimated 5 years!) with many innovative features designed …

Read more

Ametek 880-NSL Tail Gas Analyzer

Ametek 880NSL

Ametek the leader in tail gas analysis for over 25 years, is proud to introduce Ametek 880-NSL Tail Gas Analyzer. This compact, rugged, transmitter-style analyzer mounts directly on your process pipe. The Ametek 880-NSL Tail Gas Analyzer was designed using new technological advancements developed to meet your operational demands. Ametek 880-NSL Tail Gas Analyzer APPLICATIONS …

Read more

Ametek 909 Hot/Wet Single Gas Mass Flow CEM

The Ametek 909 Hot/Wet Single Gas Mass Flow CEM is a single gas version of our Model 910 Continuous Emissions Monitor. The Ametek 909 Hot/Wet Single Gas Mass Flow CEM is specifically configured for monitoring stack emissions on a mass rate basis. It measures stack effluent temperature and velocity in addition to pollutant concentrations at …

Read more

Ametek 920 Hot/Wet Multi Gas Analyzer

The Ametek 920 Hot/Wet Multi Gas Analyzer has been specifically designed to meet the requirements of the most challenging process and emissions monitoring applications in a cost-effective fashion. The Ametek 920 Hot/Wet Multi Gas Analyzer is a multi-component analyzer capable of measuring up to five different gases simultaneously. It therefore performs analyses typically requiring two …

Read more

Ametek 910 Hot/Wet Multi Gas Mass Flow CEM

The Ametek 910 Hot/Wet Multi Gas Mass Flow CEM is a version of the Model 920 specifically configured for monitoring stack emissions on a mass rate basis. The standard configuration measures stack effluent temperature and velocity in addition to pollutant concentrations at stack conditions, enabling mass emission rates to be reported. With the addition of …

Read more

Ametek 933 H2S in Natural Gas analyzer

Ametek 933

The Ametek 933 H2S in Natural Gas analyzer is the response to the need for a low maintenance, reliable, and rugged H2S analyzer. The Ametek 933 H2S in Natural Gas analyzer uses Ametek’s proprietary frontal elution chromatography sampling technique, combined with our exceptionally high-resolution multi-wavelength UV optical bench. The result is a unique low level H2S …

Read more

Ametek 930 H2S in Sulfur Pit Analyzer

Backed by over thirty years of process and analyzer experience in sulfur recovery, Ametek developed the Ametek 930 H2S in Sulfur Pit Analyzer for sulfur pit storage applications. The Ametek 930 H2S in Sulfur Pit Analyzer has been field proven as one of the industry’s most reliable instruments for monitoring H2S and SO2 Ametek 930 …

Read more

Ametek Model 4000 Photometric Analyzer

Ametek 4000

The Ametek Model 4000 Photometric Analyzer is the world’s choice for reliable, accurate, continuous, on-line photometry measurement, and the only photometric analyzer on the market with over 40 years of actual field experience in thousands of applications. The analyzer was initially developed to fill various measurement needs within the chemical industry, and later the applications …

Read more

Ametek IPS-4 Integrated Photometric Spectrometer

Ametek IPS4 Inside

The Ametek IPS-4 Integrated Photometric Spectrometer is a huge step forward in capability and reliability for process spectrophotometers. Using the most modern electronics and diode array technology, the Ametek IPS-4 Integrated Photometric Spectrometer is engineered to perform a wide variety of liquid and gas analyses using UV-VIS spectroscopy. Ametek IPS-4 Integrated Photometric Spectrometer BENEFITS • …

Read more

Ametek ProMaxion process mass spectrometer

Ametek ProMaxion

The Ametek ProMaxion process mass spectrometer offers real-time gas analysis in a reliable easy-to-use package for a wide range of industrial applications. With more than 20 years’ experience in mass spectrometer design and manufacture, and over six thousand quadrupole analyzers operating reliably worldwide, the Ametek ProMaxion process mass spectrometer brings cost-effective, high-performance analysis to your process.

Ametek ProLine process mass spectrometer

Ametek ProLine

With outstanding sensitivity, stability and unequaled clean mass separation across the whole mass range, the Ametek ProLine process mass spectrometer offer process MS at a process GC price. Available in benchtop, weatherproof and hazardous area configurations, the analyzers can sample from up to 32 inlet ports each of which can be assigned different analysis methods. Now you can afford to use MS for applications currently using GC, NIR, FTIR or multiple single component devices, or as a complement to multiple process analyzers. Available with 1-100, 1-200 or 1-300 amu range.