Analytical Solutions and Products delivered a fully integrated dewpoint control system. This for an ammonia factory experiencing liquid condensation problems in their sample lines. ASaP has helped to provide the customer with a solution to solve and secure their analyzers from water condensation.
Sample gas coolers to reduce temperature by Bühler Technologies
Sample gas coolers are used to remove any moisture from the gas is an important step in sample gas conditioning. To achieve this, suitable coolers are applied to reduce the gas temperature below the dew point in order to condense the moisture. To secure a reproducible analysis result the dew point must remain as stable as possible even when the ambient temperature fluctuates.
Sample gas filters for gas filtration by Bühler Technologies
Sample gas filters are used to filter finer dust from your gas analyzer system. Even when the contaminants have been removed at the extraction point through effective particle filtration inside the sample gas probe, there is still a risk of finer dust entering the gas measuring system. For this reason effective analysis sample gas filters are required, but also for use in stationary or portable sample gas conditioners. These can be in-line filters or panel filters with housings made from various material combinations. Equipped with easy to change filter elements with various retention rates and an adequate filter size they can be used for a wide rang
100 Phazers and counting!
We are proud to announce that ASaP recently started up the 100th ASaP Phazer at a large LNG production facility in the US Gulf Region! The positive feedback we have received from our customers in the past years on the design and performance of our Phazers and LNG sampling systems almost makes us blush! :) This proves that with thanks to the hard work of our team of LNG experts, ASaP is on track with its ambition: to become the No. 1 in LNG analysis worldwide.
Sample gas probes by Bühler Technologies
Sample gas probes form a critical point between process and analysis system. They extract sample gas from the process stream and supply it to the analysis system. They should already remove undesirable particulates at the sampling point and avoid cold spots thus preventing false measurements. Our probes are easy to maintain without requiring a lot of tools. Their designs are suitable for critical ambient conditions such as explosive areas and provide weather protection.
Sample gas pumps by Bühler Technologies
Sample gas analysis systems require sample gas pumps when the process pressure is not sufficient to transport an adequate volume of sample gas to the analysers reliably. The frequent corrosive and aggressive nature of the sample gas demands special properties of the material in contact with the media. The pumps can also transport potential condensate.
LNG sampling with the ASaP LNG Sampler System
ASaP engineers and manufactures LNG analysis and LNG sampling systems with a wide variety of gas analyzing and LNG sampling options and solutions. The ASaP LNG Sampler System conforms to ISO 8943:2007 The ASaP LNG Sampler System is available as an Intermittent or Continuous system The ASaP LNG Sampler System is configurable to suit your[…]
LNG probe-vaporizer for accurate LNG samples – The Phazer
The Phazer conforms to ISO 8943:2007 and surpasses NEN-EN 12838:2000. Your LNG measurement is only as accurate as your provided sample… The Phazer is the only cryogenic LNG probe-vaporizer that provides verifiably accurate and representative LNG samples at 0,5 barg.
Integrated mercury sampling for the LNG Sampler system according ISO 6978-2: 2003
The integrated mercury sampling extension for the ASaP intermittent LNG Sampler system is designed as an add-on. On June 2021 Analytical Solutions and Products had a very successful Factory Acceptance Test (FAT). The LNG Sampler for an off-shore location in Mozambique, passed the FAT with flying colors.
LNG Sampler predictive maintenance and operation with AIM
LNG Sampler predictive maintenance is now integrated with ASaP’s proprietary Analysis Information Module. The AIM analyzer data collection software has been developed in-house by ASaP’s engineering team and can be implemented with any brand or type of analyzer available in any analyzer system, new or retrofit! We have recently integrated AIM in our LNG Sampler[…]
Genie 133 Membrane Separator – A+ Corporation
The GPR™ consists of a housing and a membrane-tipped probe regulator. The housing is installed in a depressurized pipeline through a vertically mounted thread-o-let or flange
Flare Gas Probe – Sample take-off and extreme sample conditions
One of the successful developments of ASaP’s R&D department is the ASaP Inclined Fall-back Stokes’ Law Flare Gas Probe. This Flare Gas Probe solves the ‘old’ problem of plugging and fouling the probe and the sample conditioning system and the gas analyzers downstream. It ensures that the analyzer system remains protected from unexpected fouling ensuring uninterrupted[…]
Automated Fast Loop Liquid Samplers
ASaP is proud to announce a new line of product; Automated Fast Loop Liquid Samplers in addition to our gas sampling systems. Our Automated Fast Loop Liquid Samplers are based on the design of our gas samplers, which we are successfully supplying for several years in the oil and gas industry. Instead of taking manual[…]
Vortex shedding – Not with Orbital VE technology
Accurate sampling starts at the sample probe. A typical probe used in process sample handling is a cylindrical piece of metal that is placed in the process pipe. One of the downsides of these conventional sample probes is the vortex shedding effect which means that a small Vortex gets formed at the tip of the[…]
Genie GPR Probe Regulator – A+ Corporation
The GPR™ consists of a housing and a membrane-tipped probe regulator. The housing is installed in a depressurized pipeline through a vertically mounted thread-o-let or flange
Genie 752 Direct Drive Thermowell Probe – A+ Corporation
The Direct Drive Model 752™ thermowell probe allows a resistance temperature detector (RTD) to be inserted and extracted from a pressurized system through a full opening valve.
Genie 170 Lab Membrane Separator – A+ Corporation
The Model 170 protects gas systems requiring very low sample flow rates on a continuous or intermittent basis.
Avenger 38M Particulate Coalescing Filter – A+ Corporation
The Avenger™ Model 38M is the same size as the Model 38, and contains Genie® Membrane Technology™.
SilcoNert and Silcolloy
Oil & Gas Production coatings Silcotek applications:Natural gas research facilities, oil services firms, engineering firms, field/well testing services, oil and gas exploration companies. Click here for all SilcoTek products. SilcoNert® 2000 Features SilcoNert® 2000 Benefits Inert sample pathways Proven to low part-per-billion sensitivity High repeatability High sample stability over time Allows accurate grading of feedstock[…]
CYCLOPS Z – Purge Indicator
Low cost Simple to install & use Highly reliable & maintenance free Enclosure vent is part of casing Local & remote status indicator Casing available in anodized aluminum & 316 stainless steel 12 or 24 VDC & 115 or 230 VAC All in One Unit Overview To prevent the possibility of fire or explosion inside[…]
NOx converters by Bühler Technologies
NOx converters are used to convert NOx. In order to protect life and the environment, the emission of nitric oxides must be reduced and monitored.
Buhler MAS
The Buhler MAS system combines a 19″gas analyzer and a sample conditioning system in a rigid transport case. The conditioning components, including the cooler, filter, pump and flow meter, are customized to the application. The transport case is a double wall construction and highly shock resistant. Wheels, carrying handles and a handle for pulling the[…]
Buhler SCS19
The Buhler Model SCS Sample Gas Conditioner is a pre-engineered, pre-packaged sampling system including all pneumatic components that are normally used in gas analysis systems. The SCS integrates the following pneumatic functions: sample pump, sample cooler, calibration gas valves, flow meters, condensate drains, particulate filtration, and operator interface, PLC or data logger control features all[…]
Buhler SM6
These highly corrosion resistant flow meters are suitable for both liquid and gaseous applications. The SM-6-V combines a flow meter with a precision needle valve to regulate and adjust the flow. In applications where flow monitoring is critical, the flow meter can be equipped with a bi-stable flow sensor. Any deviation fron the set point[…]
Buhler SSM
Handling hazardous liquids or gases requires the use of flow meters with the vulnerable parts such as the metering glass protected against breakage. The S-SM safety flow meter provides sealed protection glass around the metering glass and an outer stainless steel shell with a sight window. A variety of construction materials is available to meet[…]
Buhler TGAK3
The Buhler Model TGAK 3 is a complete, portable gas conditioning system in a rugged metal case. The basic model consists of a gas cooler with condensate vessel, a gas pump, filter, moisture detector and a flow meter with needle valve. A version without the pump is also available. The TGAK features a unique fail-safe[…]
Circor D
The CIRCOR Tech product line consists of μMS3 Series Sample Conditioning Systems, D Series Modular Diaphragm Valves and all related CIRCOR Tech Certified, NeSSI Compliant 3rd-Party Components necessary to build modular sample conditioning systems for analyzers. Along with the hardware, the CIRCOR Tech product line includes a myriad of service attributes, such as Expert Process[…]
Circor MS3
The CIRCOR Tech product line consists of μMS3 Series Sample Conditioning Systems, D Series Modular Diaphragm Valves and all related CIRCOR Tech Certified, NeSSI Compliant 3rd-Party Components necessary to build modular sample conditioning systems for analyzers. Along with the hardware, the CIRCOR Tech product line includes a myriad of service attributes, such as Expert Process[…]
GO Regulator Diaphragmvalves
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure that there is no transport of undesirable elements into the fl ow stream, and no escaping of process material into the atmosphere. Elgiloy® diaphragms ensure[…]
GO Regulator BP6
BP-6 Series High Flow Back Pressure Regulator The BP-6 Series was originally designed as a back pressure regulator for reverse osmosis water purification systems. It may also be easily used in pilot facilities and large instrumentation systems. The standard 316 stainless seat assembly, which was intended for long term usage in sea water, can also[…]
GO Regulator BP3
BP-3 SeriesAdjustable Back Pressure Regulators The BP-3 Series is designed for either liquid or gas servicein instrumentation systems. Similar in design to pressurereducing control regulators which regulate outlet pressures, back pressure regulators control the inlet pressure. The many features of this regulator, particularly its precise throttling action, make it ideal for this type of application.[…]
GO Regulator BP8
BP-8 Series High Flow Back Pressure Regulators This series is designed to control back pressure at low to moderate pressure ranges with relatively high flow. While designed primarily for instrumentation systems and similar to the PR-7, the BP-8 is also suitable for pilot plant, research and development activities. Special diaphragm and spring combinations give the[…]
GO Regulator BP8LF
BP-8LF SeriesHigh Sensitivity Back Pressure Regulators This series is designed to control back pressure at low tomoderate pressure ranges with relatively high flow. Whiledesigned primarily for instrumentation systems and similarto the PR-7, the BP-8 is also suitable for pilot plant, research and development activities. Special diaphragm and spring combinations give the user a selection of[…]
GO Regulator BP60
BP-60 Series High Pressure Back Pressure Regulators The BP-60 Series is the counterpart of the PR-50 pressure reducing series for systems that are higher in pressure and low to moderate flows. This regulator has a diaphragm for maximum sensitivity in providing relief at high pressures. The Teflon® stainless seat assembly provides good shut off in[…]
GO Regulator BP66
BP-66 Series High Pressure Back Pressure Regulators (10,000psig) The BP-66 Series is the counterpart of the PR-57 pressure reducing series for systems that are higher in pressure and low to moderate flows. This regulator has piston sensing to provide relief at high pressures. The Polyimide/stainless seat assembly provides good shutoff in most applications. For economy[…]
GO Regulator CC2
CC2 Series Compact Two-stage Cylinder Pressure Regulator The CC2 Series compact two-stage precision pressure regulator is well suited for instrumentation applications requiring a precise and stable delivery pressure. This regulator was originally designed to meet the needs of the instrumentation industry; however, it would also be very useful in many other applications that require a[…]
GO Regulator CBP3
CBP-3 SeriesCompact Stainless Steel Back Pressure Regulators The CBP-3 Series is a compact back pressure regulator with some of the time proven features of the BP-3 Series and new features evolving the compact size. This regulator is designed to allow the construction of compact sophisticated analytical instrumentation where the optimum in back pressure control is[…]
GO Regulator COM1
COM-1 Series Crossover Manifold Regulator System The COM-1 Series crossover manifold system consists of two PR-1-type stainless steel regulators (PR-2-type brass, optional) mounted on a panel-mounting-type bracket shown with optional gauges. The primary regulator, supplied with a tamper-proof nut, is set at an outlet operating pressure at least 15 psig higher than the secondary regulator[…]
GO Regulator COM2B
COM-2B Series Crossover Manifold Regulator System The COM-2B Series crossover manifold system uses two PR-1-type stainless steel regulators (PR-2-type brass, optional) built in a single body functioning as the changeover regulators with the common outlet port connected to a single line regulator to provide constant unchanging supply pressure unaffected by supply source depletion. All are[…]
GO Regulator CPR1
CPR-1 Series Compact Stainless Steel Pressure Reducing Regulator The CPR-1 Series is a compact pressure regulator with most of the same internal design features employed in our time proven PR-1 Series. This regulator was designed to provide optimum performance as a “lecture bottle regulator” for pressure control in any application where a small size and[…]
GO Regulator CYL20
CYL-20 Series Corrosion-resistant Two-stage Pressure Reducing Regulator Precision pressure control is now possible with the CYL-20 Series regulator. This two-stage regulator, constructed of 316L stainless steel and Teflon®, has less than 0.01 percent outlet pressure change with varying inlet pressures and is designed for use in gas calibration systems and semiconductor materials processing. With materials[…]
GO Regulator CPR5
CPR-5 Series Compact Stainless Steel Pressure Regulator The CPR-5 Series pressure control valve is designed for service at high flows with good sensitivity and regulation utilizing a small footprint. While the design was originated for gas systems, this valve is perfectly suitable for liquid systems that are compatible with the materials of construction. Also of[…]
GO Regulator Cyclone
Cyclone Single or Dual Element Bypass-type Filter The Cyclone filter’s unique design provides an unsurpassed combination of rapid response, minimum dead volume and high efficiency filtration. Using the proven bypass design, a large sample flow is passed through the filter body so the sample transport lag time is minimized. Only that portion of the sample[…]
Kin-Tek Permeationtubes
Kintek Permeationtubes Betrouwbaar en nauwkeurigGravimetrisch, gecertificeerd enNIST traceble.ComplianceOSHA, ISO 9000, GMP, NIST: 5 jaar registratieInstrument performance validatie programma.VeiligheidDe volumes van de tubes zijn fracties van druk gevuldegas cilinders en zijn gemaakt van een niet breekbare materiaal. Er zijn geen speciale transporten nodig.Kosten1 tube vervangt 10 stuks 50 liter cilinders. Met 1 gas generator en 1[…]
MCZ GC Modules
The calibration system CGM enables the automation of such routine tasks as calculation and adjustment of span gas concentrations. It is possible to set up complete test programs for multipoint calibrations. Up to eight span gas modules can be controlled with the software. Software runs on PC under Windows 98, Windows NT or 2000. The[…]
MCZ CMK
The mobile calibration system MK5-BNT is available in two designs.Once as a permeation system to produce span gases according to the permeation method or with an ozon generator to produce ozon span gases – optionally with the added possibility for gas phase titration. Both designs posses an internal zero gas supply for the calibration process,[…]
O’Brien Slimline
S-LINE is suggested for 1″ and smaller steam, condensate, liquid and gas transport lines where personnel protection and heat loss are important. S-LINE offers an inexpensive alternative to field insulation and weatherproofing of small diameter lines. APPLICATIONS Steam supply lines Condensate return lines Small diameter process lines BENEFITS Save time and labour when installing lines[…]
MCZ MK2
With the permeation of MK2 series, is a cost-effective and flexible calibration function for routine checking of analyzers and gas chromatographs available. The system generates the MK2 Calibration gas for the permeation in a high-precision permeations oven provided in a range of 35 ° C to 110 ° C adjustable. The switching of the test[…]
MCZ MK5
Multi-Gas Calibration System The calibrating systems of the MKseries allow us to provide a custom built unit, which consists of a variety of tried and tested basic modules.This unit will be tailored specifically to your application. THE MODULES Multi-Component Gas Mixer Optionally preparation an of calibration gas by: Saturation Method Continuous Injection Ozone Generator Gas[…]
GO Regulator CYL2
CYL-2 Series Two-stage Brass Cylinder Gas Pressure Reducing Regulator The CYL-2 Series is a precision two-stage regulator well suited for instrumentation applications requiring a precise and stable pressure source. This pressure regulator was developed to meet the needs of the instrumentation industry, but is also well suited for other applications requiring precision pressure supply. The[…]
GO Regulator CYL1
CYL-1 Series Single Stage Brass Cylinder; Gas Pressure Reducing Regulator The CYL-1 Series is designed as a complete compact pressure control module. The basis of this unit is the economical PR-2 Series pressure control valve which is widely used in instrumentation sample systems as well as many other applications requiring maximum reliability. This regulator, when[…]
GO Regulator CYL3
CYL-3 Series High Pressure Economy Brass Cylinder Regulator The CYL-3 Series is an economical brass high pressure regulator, designed to accept inlet pressures up to 3600 psig and deliver outlet pressures from 0–100 psig up to 0–2000 psig. This single-stage brass regulator is perfectly suited for cylinder usage with non-corrosive gases. Good regulation characteristics are[…]
GO Regulator CYL-21 Series Pressure Regulators
GO Regulator CYL-21 Series Pressure Regulators Corrosion-resistant Single Stage Cylinder Regulator The GO Regulator CYL-21 Series Pressure Regulators are compact cylinder regulator based on the time proven design of the PR-1 single-stage line regulators. While normally used for low and moderate flow service, optional high flow orifices are available. The standard unit is equipped with[…]
GO Regulator F4
F-4 Series In-line Filter This filter is designed to be used as a standard in-line filter or it may easily be threaded into a pressure regulator or valve body for inlet protection. If desired, we will install this filter for you into any of our standard pressure control products prior to shipment. For your special[…]
GO Regulator F6K
F-6K In-line or Bypass Filter The F-6K in-line or bypass filter has been designed with bar stock construction to provide reliable and economical fi ltration of streams having pressures up to 6,000 psig (41.37 MPa) at 70° F (20° C). Materials of construction (standard) are 316 stainless steel and Teflon® for maximum service capability at[…]
GO Regulator LG1
LG-1 Series Ultra Miniature Pressure Regulator The LG-1 is an ultra-miniature pressure regulator that has many of the same features found in the time-tested design of the CPR-1 & PR-1 Series pressure regulators. Designed for surface, panel or manifold mounting, the LG-1 offers the utmost in versatility to the systems designer. It’s low internal volume[…]
GO Regulator LB1
LB-1 Series Ultra-miniature Back Pressure Regulators The LB-1 is an ultra-miniature back pressure regulator that employs many of the same features found in the time-tested design of the CBP-3 & BP-3 Series back pressure regulators. Designed for surface, panel or manifold mounting, the LB-1 offers the utmost in versatility to the systems designer. It’s low[…]
GO Regulator PR1
PR-1 Series Adjustable Pressure Reducing Regulator The PR-1 Series is a versatile pressure reducing regulator designed to fulfill a wide range of needs in instrumentation sample systems and other applications such as semiconductor processing gases. Many features of the PR-1 make it ideal for a wide range of applications controlling pressures at low to moderate[…]
GO Regulator PR-50 Series High Pressure Regulators
GO Regulator PR-50 Series High Pressure Regulators Diaphragm-type High Pressure Regulator The GO Regulator PR-50 Series High Pressure Regulators are designed to meet the demands for outlet pressures up to 2000 psig while maintaining superior corrosion protection. For reliability in operation, this precision regulator features a stainless steel body (optional brass) which provides maximum corrosion[…]
GO Regulator PR-59 Series High Pressure Regulators
GO Regulator PR-59 Series High Pressure Regulators Designed for low and high pressures up to 4000 psig inlet, the GO Regulator PR-59 Series High Pressure Regulators pressure reducing regulator controls high flow with its Cv flow coefficient of 1.2. Though normally supplied without self-relieving capability, this feature can be added as an option. While primarily[…]
GO Regulator PR57
PR-57 Series High Pressure Corrosion-resistant Regulator (10,000 psig Inlet) To meet the demands for the safe reduction of inlet pressures up to 10,000 psig, GO Regulator has designed the PR-57 Series regulator. This precision regulator features a piston sensing design which provides the operator with low adjusting torque requirements when setting the outlet pressure. The[…]
GO Regulator SBPR
SBPR Series Subatmospheric Back Pressure Regulators The SBPR Series subatmospheric back pressure regulator is designed to provide precise upstream vacuum control. One example of this could be to introduce a sample gas at a positive pressure into a vacuum chamber. Downstream from this chamber would be the SBPR and a vacuum pump. The positive pressure[…]
Go Regulator SPR
SPR Series Subatmospheric Pressure Regulator The SPR Series Sub atmospheric Pressure Regulator is designed for the introduction of a low vapour pressure reactive or purge gas into a sub atmospheric process. The large diameter diaphragm provides optimum sensitivity for sub-atmospheric or positive pressure control. Standard features allow service in many varied applications including corrosive fluids[…]
GO Regulator COM2P
COM-2P Series Crossover Manifold Regulator System The COM-2P employs two discrete single stage PR-1-type regulators built into a single body. These regulators serve as the primary and secondary changeover regulators with the common outlet port connected to a single PR-1 Series regulator. This allows for the non-stop delivery of gas from bottles with only a[…]
