The Pipeline Contamination Monitor called LineVu from Process Vision is a video-based system designed to detect contamination in high pressure natural gas systems, enable alarm notifications and allow access to live video to both office-based and field-based engineers.
Sample gas coolers to reduce temperature by Bühler Technologies
Sample gas coolers are used to remove any moisture from the gas is an important step in sample gas conditioning. To achieve this, suitable coolers are applied to reduce the gas temperature below the dew point in order to condense the moisture. To secure a reproducible analysis result the dew point must remain as stable as possible even when the ambient temperature fluctuates.
Sample gas filters for gas filtration by Bühler Technologies
Sample gas filters are used to filter finer dust from your gas analyzer system. Even when the contaminants have been removed at the extraction point through effective particle filtration inside the sample gas probe, there is still a risk of finer dust entering the gas measuring system. For this reason effective analysis sample gas filters are required, but also for use in stationary or portable sample gas conditioners. These can be in-line filters or panel filters with housings made from various material combinations. Equipped with easy to change filter elements with various retention rates and an adequate filter size they can be used for a wide rang
Sample gas probes by Bühler Technologies
Sample gas probes form a critical point between process and analysis system. They extract sample gas from the process stream and supply it to the analysis system. They should already remove undesirable particulates at the sampling point and avoid cold spots thus preventing false measurements. Our probes are easy to maintain without requiring a lot of tools. Their designs are suitable for critical ambient conditions such as explosive areas and provide weather protection.
Sample gas pumps by Bühler Technologies
Sample gas analysis systems require sample gas pumps when the process pressure is not sufficient to transport an adequate volume of sample gas to the analysers reliably. The frequent corrosive and aggressive nature of the sample gas demands special properties of the material in contact with the media. The pumps can also transport potential condensate.
CEMS analyzer shelter completed with our valued partner ABB
Earlier this year ASaP successfully completed CEMS analyzer shelter in corporation with our valued partner ABB. The individual hydrocarbon measurements are handled by an ABB PGC5000 A+C and the remaining CEM components with an ABB Advance Optima 2000 analyzer.
ABB EasyLine analyzer series
The ABB EasyLine analyzer series is both a powerful and affordable line of instruments for the monitoring of gas concentrations in numerous applications. ABB offers three series of extractive gas analyzers catering to a diverse range of industries and applications.
Sulfur Recovery Tail Gas Analyzer, The Ametek Model 888
The Ametek Model 888 Sulfur Recovery Tail Gas Analyzer, the successor of the 880 NSL uses field-proven and highly reliable UV technology to accurately monitor the H2S and SO2 concentrations in sulfur recovery tail gas. This compact, rugged analyzer mounts directly on the process pipe, eliminating the complexity and safety issues of fiber optic coupled photometers.
Successful FAT critical measurement with ABB Fidas analyzer
After being involved in engineering several projects over the past 2 years, I had the pleasure to conduct my first FAT (Factory Acceptance Test) together with Fulco from our service team. This project is for a critical measurement using an ABB Advance Optima Fidas analyzer which was installed in an optimized panel, containing utility and calibration gases, and sample eductor that allows accurate flow control towards the system. I am happy to say the customer was very happy with our performance and the quality of the system we built.
Physical property analyzers, Freeze and Cloud Point by ICON
Physical property analyzers – For years refineries are measuring the formation of crystals once the temperature drops in gasoil (Diesel).
Hydrogen monitoring, real time in syngas with HY-OPTIMATM 2745
Synthesis gas, also known as syngas, is composed mainly of carbon monoxide and hydrogen, with carbon dioxide sometimes also present. There are various methods of producing syngas, such as gasification from different feedstocks (coal, natural gas, or biomass/waste products), partial oxidation, steam methane reforming, or autothermal reforming.
ASaP appointed as ABB Value Provider
We are very happy and proud with the new step in the cooperation between ASaP and ABB; ASaP is now member of the ABB Value Provider Program!
Genie 133 Membrane Separator – A+ Corporation
The GPR™ consists of a housing and a membrane-tipped probe regulator. The housing is installed in a depressurized pipeline through a vertically mounted thread-o-let or flange
Colour Opacity Analyzer with Illuminating technology – ICON
The icon scientific Colour Opacity Analyzer uses a dispersive spectrometer module to carry out colour, opacity and concentration measurement. Easy to use: with an armored glass wipe-clean touch-screen and intuitive multi-lingual graphic user interface. Certified to global standards: ATEX, IECEx, TIIS, EAC, and ETL approved to give absolute confidence and peace of mind in hazardous[…]
Distillation Analyzer Reliable resilient measurement – ICON
The icon scientific Distillation Analyzer is used to measure individual boiling points or the boiling ranges of petroleum products from the light to middle distillate ranges. Easy to use: with an armored glass wipe-clean touch-screen and intuitive multi-lingual graphic user interface. Certified to global standards: ATEX, IECEx, TIIS, EAC, and ETL approved to give absolute[…]
Flash Point Analyzer – More precision more profit – ICON
The icon scientific Flash Point Analyzer measures the lowest temperature at which typically kerosene or diesel fuel will form a flammable vapour mixture with air. Easy to use: with an armored glass wipe-clean touch-screen and intuitive multi-lingual graphic user interface. Certified to global standards: ATEX, IECEx, TIIS, EAC, and ETL approved to give absolute confidence[…]
Freeze Point Analyzer for premium performance – ICON
The icon scientific Freeze Point Analyzer provides an indicator of the lowestambient temperature at which an aviation jet fuel can be used. Using advancedcryo-cooling, it can measure freeze points down to -80°C. Easy to use: with an armored glass wipe-clean touch-screen and intuitive multi-lingual graphic user interface. Certified to global standards: ATEX, IECEx, TIIS, EAC,[…]
Pour Point Analyzer with Advanced cooling technology – ICON
The icon scientific Pour Point Analyzer is used to provide an indicator of the lowest temperature at which typically a fuel oil may be used. Easy to use: with an armored glass wipe-clean touch-screen and intuitive multi-lingual graphic user interface. Certified to global standards: ATEX, IECEx, TIIS, EAC, and ETL approved to give absolute confidence[…]
Cloud Point Analyzer with class-leading repeatability – ICON
The icon scientific Cloud Point Analyzer is used to provide an indicator of thelowest temperature at which typically a diesel fuel may be used. Easy to use: with an armored glass wipe-clean touch-screen and intuitive multi-lingual graphic user interface. Certified to global standards: ATEX, IECEx, TIIS, EAC, and ETL approved to give absolute confidence and[…]
Viscometer Analyzer and Viscosity Index for Reliable measurement
The icon scientific Viscometer Analyzer is used to measure the dynamic viscosity of a range of petroleum products including lube oils, lube oil stocks, biodiesel and fuel oils. Easy to use: with an armored glass wipe-clean touch-screen and intuitive multi-lingual graphic user interface. Certified to global standards: ATEX, IECEx, TIIS, EAC, and ETL approved to[…]
Icon Scientific & ASaP B.V.
ASaP and Icon are very happy to announce that the formal exclusive distributor contract was signed by both management teams in the beginning of September. Icon Scientific is a world-wide supplier and manufacturer of physical property analyzers. They were looking for a new supplier and service provider for the Benelux, Germany and the Nordic countries[…]
Vapour Pressure Analyzer with precision laser performance – Icon
The Icon scientific Vapour Pressure Analyzer measures the pressure exerted by vapour in equilibrium above a liquid at a specified temperature and vapour-liquid ratio. Easy to use: with an armored glass wipe-clean touch-screen and intuitive multi-lingual graphic user interface. Certified to global standards: ATEX, IECEx, TIIS, EAC, and ETL approved to give absolute confidence and[…]
CEMS – Continuous Emission Monitoring System – ABB ACF5000
Early this year ASaP was asked to present a new CEMS system solution for a well-known gas-supplier in the Rotterdam Botlek Area. Their CEMS system needed an upgrade as it had to measure additional components on top of their current CEMS measurement. As the official Channel Partner of ABB, ASaP discussed the possibilities for replacing[…]
Hydrogen Process Analyzer – HY-OPTIMA 2700
Refinery hydrogen recycle stream optimization The hydrogen process analyzer HY-OPTIMA 2700 can save you more than $200,000 on a yearly basis in a typical refinery process unit. As hydrogen is an extremely important, valuable, and limited resource within a modern complex refinery. The profitable operation of a refinery is increasingly dependent on effective fuel upgrading[…]
Reid vapor pressure analyzers RVP4500 Series
Increase your gasoline blending profits with the Reid vapor pressure analyzers RVP4500 Series and automatic air saturation of the sample. The ABB RVP4500 Reid vapor pressure analyzers accurately measures Reid Vapor Pressure throughout the gasoline range and its feed stocks. The RVP4500 Series offers a simple, reliable, compact, single cell design that requires minimal operator interface,[…]
Total Sulfur Analyzer – Process gas chromatograph PGC5007
The PGC5007 Total Sulfur Analyzer performs analysis for a range of streams, liquid and vapor, from natural gas to gasoline and diesel. A fixed volume of sample from the process stream is injected via a sample inject valve. Air transports the sample into the furnace, where it oxidizes the sample to carbon dioxide, water and sulfur dioxide.[…]
H2 measurement with free of charge trial demo unit
Are you looking for a H2 measurement? We can provide you a free of charge trial demo unit. H2 measurement December update We are happy to announce that after a successful first trial period, our H2 measurement demo unit is free for measurement again. The unit ran parallel with a CGA-analyzer and the results were[…]
ABB Advance Optima Integrated analyzer system solution
The ABB Advance Optima Integrated analyzer system has a modular design that offers a long-term security in your investment. Analyzer modules can be freely combined into tailor-made solutions and upgraded or extended with new features at any time. Remote modules are easily attached and centrally operated.
Natural gas analyzer – ABB NGC8200 series gas chromatographs
The natural gas analyzers from the ABB NGC8200 series natural gas analyzers represents the most rugged, economical, and high-precision on-line gas chromatographs in the industry. Designed with flow computer and chromatograph capabilities for energy metering, the NGC8200 series provides not only best-in-class, on-site analysis, but also offers a highly versatile platform that integrates many of the[…]
ABB Multiwave ultraviolet process photometer PUV3402
The ABB Multiwave ultraviolet process photometer PUV3402 is designed for the UV (ultraviolet) and VIS (visible) spectra regions. The ABB Multiwave photometers provide continuous measurements in complex streams which allow for fast reactions to process changes. The fast analysis provides optimum control of a process and improves its safe operation. Measurements can be made in liquid or vapor streams.
Fast Process Gas Chromatograph ABB PGC5009
ABB announces the release of the PGC5009 Fast Process Gas Chromatograph, the newest addition to ABB’s gas chromatography product portfolio. A relatively small shift in the cut point (the threshold temperature for good product) for any refinery product can cost refiners millions of dollars in profits. In the absence of fast, accurate and reproducible boiling[…]
Dual laser gas analyzer: Ametek Model 5100 HD
Model 5100 Series Gas Analyzer is based on Tunable Diode Laser Absorption Spectroscopy (TDLAS). The dual laser gas analyzer Model 5100 HD hosts a dual laser platform. Two separate lasers are installed in the instrument, sharing a common optical path through the sample, enabling the measurement of two analytes simultaneously. This results in significant cost[…]
ZONE 1 EXd WDG-V combustion analyzer: WDG-V Zone 1
The WDG-V Zone 1 is a legacy product – No longer available Click here for the replacement model: Combustion analyzer: Ametek Thermox WDG-V Ametek Thermox ZONE 1 EXd WDG-V Combustion Analyzer PDF The Thermox ZONE 1 EXd WDG-V combustion analyzer from AMETEK Process Instruments has been third-party certified for Zone 1 hazardous locations, allowing the[…]
Combustion analyzer: Ametek Thermox WDG-V
Prevention is so Easy… Living Through a Disaster Isn’t Ametek Thermox WDG-V Combustion Analyzer Sensor PDF Why the need for a combustion analyzer? The reliable identification of low combustion oxygen in a fired heater or boiler has always been critical to the effectiveness of the Burner Management System for proper control and safety. Low emission[…]
Flue gas oxygen analyzers: WDG 1200 / 1210 / INSITU
Flue gas oxygen analyzers with Modbus communication The WDG 1200 / Insitu and the WDG 1210 / Insitu are rugged, reliable flue gas oxygen analyzers for net oxygen that use industry-proven zirconium oxide sensor technology. The outer probe tube is 310 stainless steel so no abrasion shield is needed for most applications. The controller features[…]
Vortex shedding – Not with Orbital VE technology
Accurate sampling starts at the sample probe. A typical probe used in process sample handling is a cylindrical piece of metal that is placed in the process pipe. One of the downsides of these conventional sample probes is the vortex shedding effect which means that a small Vortex gets formed at the tip of the[…]
MKS Precisive TFS Tunable Filter Spectroscopy
The MKS Precisive® product platform of innovative optical analyzers based on Tunable Filter Spectroscopy (TFS™) provides real-time gas analysis in the natural gas and hydrocarbon processing industries, including refineries, hydrocarbon processing plants, gas-to-power machines, biogas processes and fuel gas transportation and metering, while delivering customers a substantially lower total cost of ownership.
Genie GPR Probe Regulator – A+ Corporation
The GPR™ consists of a housing and a membrane-tipped probe regulator. The housing is installed in a depressurized pipeline through a vertically mounted thread-o-let or flange
Genie 752 Direct Drive Thermowell Probe – A+ Corporation
The Direct Drive Model 752™ thermowell probe allows a resistance temperature detector (RTD) to be inserted and extracted from a pressurized system through a full opening valve.
Genie 170 Lab Membrane Separator – A+ Corporation
The Model 170 protects gas systems requiring very low sample flow rates on a continuous or intermittent basis.
Avenger 38M Particulate Coalescing Filter – A+ Corporation
The Avenger™ Model 38M is the same size as the Model 38, and contains Genie® Membrane Technology™.
GoreVega Portable Flight Case C9+ Natural Gas Analyzer
For our partner Gorevega in Aberdeen, ASaP has developed a Portable Flight Case C9+ Natural Gas Analyzer to be used mainly offshore. The Flight Case System performs on-site natural gas analysis and heating value computation using an extended analysis. Features Portable fight case for offshore travel Weighs less than 66 lb (30 kg) Modular design[…]
H2scan introduction
H2scan provides the most accurate, tolerant and affordable hydrogen leak detection and process gas measurement solutions for industrial markets. Click here for an overview of H2scan products Their patented, solid-state core hydrogen sensor technology is exclusively licensed from the U.S. Department of Energy and supported by 15 years of R&D and 10 years of field[…]
HY-OPTIMA™ 1700AS Process Hydrogen Analyzing System
H2scan’s HY-OPTIMA™ Model 1700AS Process Hydrogen Analyzing System provides tsa complete solution for process hydrogen measurement in refineries, chemical plants, air separation units and industrial gas manufacturing plan. The system comprises H2scan’s hydrogen specific analyzer in a NEMA 4X enclosure with sampling systems and is capable of operating in a broad spectrum of process conditions.[…]
Y-OPTIMA 2700AS Process Hydrogen Analyzing System
H2scan’s HY-OPTIMA Model 2700AS Process Hydrogen Analyzing System provides a complete solution for process hydrogen measurement in refineries, chemical plants, air separation units and industrial gas manufacturing plants. The system implements H2scan’s hydrogen specific analyzer in a NEMA 4X enclosure with the necessary sample conditioning components to enable operation over a broad spectrum of process[…]
E.ON: installation of Orbital GasPT2 BTU analyzer and ABB NGC8206 gas chromatograph
Recently ASaP successfully installed a combined system of two analyzers at the E.ON Powergen location Maasvlakte; the Orbital GasPT2 and the ABB NGC 8206. E.ON required a fast Wobbe index measurement for turbine control and a quality measurement of their feed gas. In order to be prepared for the future the ABB gas chromatograph measures[…]
ABB PGC5000 Series
The ABB PGC5000 Series process gas chromatograph is based on over 50 years of innovation in on-line process gas chromatographs. It simplifies gas chromatography and increases reliability. It provides everything you need to know about your GC – at your fingertips.
SilcoNert and Silcolloy
Oil & Gas Production coatings Silcotek applications:Natural gas research facilities, oil services firms, engineering firms, field/well testing services, oil and gas exploration companies. Click here for all SilcoTek products. SilcoNert® 2000 Features SilcoNert® 2000 Benefits Inert sample pathways Proven to low part-per-billion sensitivity High repeatability High sample stability over time Allows accurate grading of feedstock[…]
CYCLOPS Z – Purge Indicator
Low cost Simple to install & use Highly reliable & maintenance free Enclosure vent is part of casing Local & remote status indicator Casing available in anodized aluminum & 316 stainless steel 12 or 24 VDC & 115 or 230 VAC All in One Unit Overview To prevent the possibility of fire or explosion inside[…]
ABB Measurement Products Benelux signs Distribution Agreement with Analytical Solutions and Products B.V.
The ABB BU Measurement Products distribution sales network is being extended with a long term partnership with Analytical Solutions and Products B.V. (ASaP) for which the agreement has been signed on June 25th 2014. ASaP, as an authorized distributor for ABB Measurement Products, will advise customers in the industrial & process automation markets on the[…]
Ametek 900, H2S, SO2, Sv, COS and CS2 at the same time
Ametek ’s Western Research Model 900 Air Demand Analyser was specifically designed to meet the more demanding analytical requirements of new processes. Used in conjunction with the ASR 900 sampling probe, which provides trouble-free sampling, the Model 900 ensures maximum data availability for optimum operation of all sulfur recovery processes. Benefits Measures up to five[…]
MCZ Easythene, the easiest ethylene monitor
Ethylene monitor, for control of catalysts in CO2 fertilization systems or for C2H4 detection for ripening process control. Ethene acts as a hormone in the ripening process of plants. To avoid destruction of plants and fruits because of high ethylene levels it is necessary to know the real amount of C2H4 in the atmosphere. To[…]
Environnement VOC72M
The VOC72M’s metrology, in accordance with EN 14662-3 standard for benzene measurement, is based on gas chromatography (GC) for the separation of the measured compounds coupled with a photo-ionization detector (PID). This compact and fully automated analyzer provides equal performance to the laboratory chromatographs and is particularly well-suited for fixed or mobileambient air quality monitoring[…]
Ametek 241
The Western Research® Model 241CE Dew Point Monitor is a quality control tool for natural gas processing, distribution, and consumption. Detection and measurement of hydrocarbon dewpoint is achieved in a single cell, single cycle operation. APPLICATIONS Pipeline quality and custody transfer Specification monitoring Gas turbine feed gas monitoring BENEFITS Accurate monitoring of hydrocarbon dew points[…]
Ametek 881NSL
AMETEK’s No Sample Line technology for the sulphur pit. The 881-NSL has no costly troublesome external sample line. The analyzer mounts directly on your sulphur pit lid, eliminating sample line plugging, the number one problem in Claus Plant analysis. The 881-NSL photometer combines an extraordinary long lamp life (estimated 5 years!) with many innovative features[…]
Ametek 880NSL
AMETEK Western Research®, the leader in tail gas analysis for over 25 years, is proud to introduce Model 880-NSL (No Sample Line) tail gas analyzer. This compact, rugged, transmitter-style analyzer mounts directly on your process pipe. The Model 880-NSL was designed using new technological advancements developed to meet your operational demands. APPLICATIONS Sulphur recovery units[…]
Ametek 909
The AMETEK Western Research® Model 909 is a single gas version of our Model 910 Continuous Emissions Monitor. The analyzer is specifically configured for monitoring stack emissions on a mass rate basis. It measures stack effluent temperature and velocity in addition to pollutant concentrations at stack conditions, enabling mass emission rates to be reported. With[…]
Ametek 920
The Western Research® Model 920 has been specifically designed to meet the requirements of the most challenging process and emissions monitoring applications in a cost effective fashion. The Model 920 is a multi-component analyzer capable of measuring up to five different gases simultaneously. It therefore performs analyses typically requiring two or more separate analyzers. The[…]
Ametek 910
The Model 910 is a version of the Model 920 specifically configured for monitoring stack emissions on a mass rate basis. The standard configuration measures stack effluent temperature and velocity in addition to pollutant concentrations at stack conditions, enabling mass emission rates to be reported. With the addition of an optional zirconium oxide sensor, the[…]
Ametek 933
AMETEK Western Research® has responded to the need for a low maintenance, reliable, and rugged H2S analyzer by developing the Model 933. The Model 933 uses AMETEK Western Research’s proprietary frontal elution chromatography sampling technique, combined with our exceptionally high resolution multi-wavelength UV optical bench. The result is a unique low level H2S analyzer that is[…]
Ametek 930
Backed by over thirty years of process and analyzer experience in sulphur recovery, AMETEK Western Research developed the Model 930 H2S Vapour Space Analyser for sulphur pit storage applications. The AMETEK- designed Model 930 has been field proven as one of the industry’s most reliable instruments for monitoring H2S and SO2 APPLICATION Sulphur recovery, storage, and[…]
Ametek 4000
AMETEK Western Research’s Model 4000 PhotometricAnalyser is the world’s choice for reliable, accurate,continuous, on-line photometry measurement, and theonly photometric analyzer on the market with over 40years of actual field experience in thousands ofapplications. The analyzer was initially developed tofill various measurement needs within the chemicalindustry, and later the applications were expanded toinclude a wide variety[…]
Ametek 4610
The 4610 Analyzer System is designed for source monitoring of nitrogen oxides. With minor changes, it can also be used for analysis of much higher concentrations (up to 100%) of nitrogen oxides in gas streams typical in acid plants. BENEFITS Complete system for monitoring NO and NO2 from emission sources. Minimum full scale range 200[…]
Ametek IPS4
AMETEK’s Western Research® IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. Using the most modern electronics and diode array technology, the IPS-4 is engineered to perform a wide variety of liquid and gas analyses using UV-VIS spectroscopy. BENEFITS • Measures up to eight wavelengths • Low cost of ownership •[…]
Ametek ProMaxion
AMETEK’s ProMaxion process mass spectrometer offers real-time gas analysis in a reliable easy-to-use package for a wide range of industrial applications. With more than 20 years’ experience in mass spectrometer design and manufacture, and over six thousand quadrupole analyzers operating reliably worldwide, ProMaxion brings cost-effective, high-performance analysis to your process. APPILCATIONS Ammonia Ethylene Ethylene Oxide[…]
Ametek ProLine
With outstanding sensitivity, stability and unequaled clean mass separation across the whole mass range, these analyzers offer process MS at a process GC price. Available in benchtop, weatherproof and hazardous area configurations, the analyzers can sample from up to 32 inlet ports each of which can be assigned different analysis methods. Now you can afford[…]
NOx converters by Bühler Technologies
NOx converters are used to convert NOx. In order to protect life and the environment, the emission of nitric oxides must be reduced and monitored.
Buhler MAS
The Buhler MAS system combines a 19″gas analyzer and a sample conditioning system in a rigid transport case. The conditioning components, including the cooler, filter, pump and flow meter, are customized to the application. The transport case is a double wall construction and highly shock resistant. Wheels, carrying handles and a handle for pulling the[…]
Buhler SCS19
The Buhler Model SCS Sample Gas Conditioner is a pre-engineered, pre-packaged sampling system including all pneumatic components that are normally used in gas analysis systems. The SCS integrates the following pneumatic functions: sample pump, sample cooler, calibration gas valves, flow meters, condensate drains, particulate filtration, and operator interface, PLC or data logger control features all[…]
Buhler SM6
These highly corrosion resistant flow meters are suitable for both liquid and gaseous applications. The SM-6-V combines a flow meter with a precision needle valve to regulate and adjust the flow. In applications where flow monitoring is critical, the flow meter can be equipped with a bi-stable flow sensor. Any deviation fron the set point[…]
Buhler SSM
Handling hazardous liquids or gases requires the use of flow meters with the vulnerable parts such as the metering glass protected against breakage. The S-SM safety flow meter provides sealed protection glass around the metering glass and an outer stainless steel shell with a sight window. A variety of construction materials is available to meet[…]
Buhler TGAK3
The Buhler Model TGAK 3 is a complete, portable gas conditioning system in a rugged metal case. The basic model consists of a gas cooler with condensate vessel, a gas pump, filter, moisture detector and a flow meter with needle valve. A version without the pump is also available. The TGAK features a unique fail-safe[…]
Circor D
The CIRCOR Tech product line consists of μMS3 Series Sample Conditioning Systems, D Series Modular Diaphragm Valves and all related CIRCOR Tech Certified, NeSSI Compliant 3rd-Party Components necessary to build modular sample conditioning systems for analyzers. Along with the hardware, the CIRCOR Tech product line includes a myriad of service attributes, such as Expert Process[…]
Circor MS3
The CIRCOR Tech product line consists of μMS3 Series Sample Conditioning Systems, D Series Modular Diaphragm Valves and all related CIRCOR Tech Certified, NeSSI Compliant 3rd-Party Components necessary to build modular sample conditioning systems for analyzers. Along with the hardware, the CIRCOR Tech product line includes a myriad of service attributes, such as Expert Process[…]
GO Regulator Diaphragmvalves
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure that there is no transport of undesirable elements into the fl ow stream, and no escaping of process material into the atmosphere. Elgiloy® diaphragms ensure[…]
GO Regulator BP6
BP-6 Series High Flow Back Pressure Regulator The BP-6 Series was originally designed as a back pressure regulator for reverse osmosis water purification systems. It may also be easily used in pilot facilities and large instrumentation systems. The standard 316 stainless seat assembly, which was intended for long term usage in sea water, can also[…]
GO Regulator BP3
BP-3 SeriesAdjustable Back Pressure Regulators The BP-3 Series is designed for either liquid or gas servicein instrumentation systems. Similar in design to pressurereducing control regulators which regulate outlet pressures, back pressure regulators control the inlet pressure. The many features of this regulator, particularly its precise throttling action, make it ideal for this type of application.[…]
GO Regulator BP8
BP-8 Series High Flow Back Pressure Regulators This series is designed to control back pressure at low to moderate pressure ranges with relatively high flow. While designed primarily for instrumentation systems and similar to the PR-7, the BP-8 is also suitable for pilot plant, research and development activities. Special diaphragm and spring combinations give the[…]
GO Regulator BP8LF
BP-8LF SeriesHigh Sensitivity Back Pressure Regulators This series is designed to control back pressure at low tomoderate pressure ranges with relatively high flow. Whiledesigned primarily for instrumentation systems and similarto the PR-7, the BP-8 is also suitable for pilot plant, research and development activities. Special diaphragm and spring combinations give the user a selection of[…]
GO Regulator BP60
BP-60 Series High Pressure Back Pressure Regulators The BP-60 Series is the counterpart of the PR-50 pressure reducing series for systems that are higher in pressure and low to moderate flows. This regulator has a diaphragm for maximum sensitivity in providing relief at high pressures. The Teflon® stainless seat assembly provides good shut off in[…]
GO Regulator BP66
BP-66 Series High Pressure Back Pressure Regulators (10,000psig) The BP-66 Series is the counterpart of the PR-57 pressure reducing series for systems that are higher in pressure and low to moderate flows. This regulator has piston sensing to provide relief at high pressures. The Polyimide/stainless seat assembly provides good shutoff in most applications. For economy[…]
GO Regulator CC2
CC2 Series Compact Two-stage Cylinder Pressure Regulator The CC2 Series compact two-stage precision pressure regulator is well suited for instrumentation applications requiring a precise and stable delivery pressure. This regulator was originally designed to meet the needs of the instrumentation industry; however, it would also be very useful in many other applications that require a[…]
GO Regulator CBP3
CBP-3 SeriesCompact Stainless Steel Back Pressure Regulators The CBP-3 Series is a compact back pressure regulator with some of the time proven features of the BP-3 Series and new features evolving the compact size. This regulator is designed to allow the construction of compact sophisticated analytical instrumentation where the optimum in back pressure control is[…]
GO Regulator COM1
COM-1 Series Crossover Manifold Regulator System The COM-1 Series crossover manifold system consists of two PR-1-type stainless steel regulators (PR-2-type brass, optional) mounted on a panel-mounting-type bracket shown with optional gauges. The primary regulator, supplied with a tamper-proof nut, is set at an outlet operating pressure at least 15 psig higher than the secondary regulator[…]
GO Regulator COM2B
COM-2B Series Crossover Manifold Regulator System The COM-2B Series crossover manifold system uses two PR-1-type stainless steel regulators (PR-2-type brass, optional) built in a single body functioning as the changeover regulators with the common outlet port connected to a single line regulator to provide constant unchanging supply pressure unaffected by supply source depletion. All are[…]
GO Regulator CPR1
CPR-1 Series Compact Stainless Steel Pressure Reducing Regulator The CPR-1 Series is a compact pressure regulator with most of the same internal design features employed in our time proven PR-1 Series. This regulator was designed to provide optimum performance as a “lecture bottle regulator” for pressure control in any application where a small size and[…]
GO Regulator CYL20
CYL-20 Series Corrosion-resistant Two-stage Pressure Reducing Regulator Precision pressure control is now possible with the CYL-20 Series regulator. This two-stage regulator, constructed of 316L stainless steel and Teflon®, has less than 0.01 percent outlet pressure change with varying inlet pressures and is designed for use in gas calibration systems and semiconductor materials processing. With materials[…]
GO Regulator CPR5
CPR-5 Series Compact Stainless Steel Pressure Regulator The CPR-5 Series pressure control valve is designed for service at high flows with good sensitivity and regulation utilizing a small footprint. While the design was originated for gas systems, this valve is perfectly suitable for liquid systems that are compatible with the materials of construction. Also of[…]
GO Regulator Cyclone
Cyclone Single or Dual Element Bypass-type Filter The Cyclone filter’s unique design provides an unsurpassed combination of rapid response, minimum dead volume and high efficiency filtration. Using the proven bypass design, a large sample flow is passed through the filter body so the sample transport lag time is minimized. Only that portion of the sample[…]
Kin-Tek Permeationtubes
Kintek Permeationtubes Betrouwbaar en nauwkeurigGravimetrisch, gecertificeerd enNIST traceble.ComplianceOSHA, ISO 9000, GMP, NIST: 5 jaar registratieInstrument performance validatie programma.VeiligheidDe volumes van de tubes zijn fracties van druk gevuldegas cilinders en zijn gemaakt van een niet breekbare materiaal. Er zijn geen speciale transporten nodig.Kosten1 tube vervangt 10 stuks 50 liter cilinders. Met 1 gas generator en 1[…]
MCZ GC Modules
The calibration system CGM enables the automation of such routine tasks as calculation and adjustment of span gas concentrations. It is possible to set up complete test programs for multipoint calibrations. Up to eight span gas modules can be controlled with the software. Software runs on PC under Windows 98, Windows NT or 2000. The[…]
MCZ CMK
The mobile calibration system MK5-BNT is available in two designs.Once as a permeation system to produce span gases according to the permeation method or with an ozon generator to produce ozon span gases – optionally with the added possibility for gas phase titration. Both designs posses an internal zero gas supply for the calibration process,[…]
O’Brien Slimline
S-LINE is suggested for 1″ and smaller steam, condensate, liquid and gas transport lines where personnel protection and heat loss are important. S-LINE offers an inexpensive alternative to field insulation and weatherproofing of small diameter lines. APPLICATIONS Steam supply lines Condensate return lines Small diameter process lines BENEFITS Save time and labour when installing lines[…]
MCZ MK2
With the permeation of MK2 series, is a cost-effective and flexible calibration function for routine checking of analyzers and gas chromatographs available. The system generates the MK2 Calibration gas for the permeation in a high-precision permeations oven provided in a range of 35 ° C to 110 ° C adjustable. The switching of the test[…]
MCZ MK5
Multi-Gas Calibration System The calibrating systems of the MKseries allow us to provide a custom built unit, which consists of a variety of tried and tested basic modules.This unit will be tailored specifically to your application. THE MODULES Multi-Component Gas Mixer Optionally preparation an of calibration gas by: Saturation Method Continuous Injection Ozone Generator Gas[…]
GO Regulator CYL2
CYL-2 Series Two-stage Brass Cylinder Gas Pressure Reducing Regulator The CYL-2 Series is a precision two-stage regulator well suited for instrumentation applications requiring a precise and stable pressure source. This pressure regulator was developed to meet the needs of the instrumentation industry, but is also well suited for other applications requiring precision pressure supply. The[…]
GO Regulator CYL1
CYL-1 Series Single Stage Brass Cylinder; Gas Pressure Reducing Regulator The CYL-1 Series is designed as a complete compact pressure control module. The basis of this unit is the economical PR-2 Series pressure control valve which is widely used in instrumentation sample systems as well as many other applications requiring maximum reliability. This regulator, when[…]
GO Regulator CYL3
CYL-3 Series High Pressure Economy Brass Cylinder Regulator The CYL-3 Series is an economical brass high pressure regulator, designed to accept inlet pressures up to 3600 psig and deliver outlet pressures from 0–100 psig up to 0–2000 psig. This single-stage brass regulator is perfectly suited for cylinder usage with non-corrosive gases. Good regulation characteristics are[…]
GO Regulator CYL-21 Series Pressure Regulators
GO Regulator CYL-21 Series Pressure Regulators Corrosion-resistant Single Stage Cylinder Regulator The GO Regulator CYL-21 Series Pressure Regulators are compact cylinder regulator based on the time proven design of the PR-1 single-stage line regulators. While normally used for low and moderate flow service, optional high flow orifices are available. The standard unit is equipped with[…]
GO Regulator F4
F-4 Series In-line Filter This filter is designed to be used as a standard in-line filter or it may easily be threaded into a pressure regulator or valve body for inlet protection. If desired, we will install this filter for you into any of our standard pressure control products prior to shipment. For your special[…]
GO Regulator F6K
F-6K In-line or Bypass Filter The F-6K in-line or bypass filter has been designed with bar stock construction to provide reliable and economical fi ltration of streams having pressures up to 6,000 psig (41.37 MPa) at 70° F (20° C). Materials of construction (standard) are 316 stainless steel and Teflon® for maximum service capability at[…]
GO Regulator LG1
LG-1 Series Ultra Miniature Pressure Regulator The LG-1 is an ultra-miniature pressure regulator that has many of the same features found in the time-tested design of the CPR-1 & PR-1 Series pressure regulators. Designed for surface, panel or manifold mounting, the LG-1 offers the utmost in versatility to the systems designer. It’s low internal volume[…]
GO Regulator LB1
LB-1 Series Ultra-miniature Back Pressure Regulators The LB-1 is an ultra-miniature back pressure regulator that employs many of the same features found in the time-tested design of the CBP-3 & BP-3 Series back pressure regulators. Designed for surface, panel or manifold mounting, the LB-1 offers the utmost in versatility to the systems designer. It’s low[…]
GO Regulator PR1
PR-1 Series Adjustable Pressure Reducing Regulator The PR-1 Series is a versatile pressure reducing regulator designed to fulfill a wide range of needs in instrumentation sample systems and other applications such as semiconductor processing gases. Many features of the PR-1 make it ideal for a wide range of applications controlling pressures at low to moderate[…]
GO Regulator PR-50 Series High Pressure Regulators
GO Regulator PR-50 Series High Pressure Regulators Diaphragm-type High Pressure Regulator The GO Regulator PR-50 Series High Pressure Regulators are designed to meet the demands for outlet pressures up to 2000 psig while maintaining superior corrosion protection. For reliability in operation, this precision regulator features a stainless steel body (optional brass) which provides maximum corrosion[…]
GO Regulator PR-59 Series High Pressure Regulators
GO Regulator PR-59 Series High Pressure Regulators Designed for low and high pressures up to 4000 psig inlet, the GO Regulator PR-59 Series High Pressure Regulators pressure reducing regulator controls high flow with its Cv flow coefficient of 1.2. Though normally supplied without self-relieving capability, this feature can be added as an option. While primarily[…]
GO Regulator PR57
PR-57 Series High Pressure Corrosion-resistant Regulator (10,000 psig Inlet) To meet the demands for the safe reduction of inlet pressures up to 10,000 psig, GO Regulator has designed the PR-57 Series regulator. This precision regulator features a piston sensing design which provides the operator with low adjusting torque requirements when setting the outlet pressure. The[…]
GO Regulator SBPR
SBPR Series Subatmospheric Back Pressure Regulators The SBPR Series subatmospheric back pressure regulator is designed to provide precise upstream vacuum control. One example of this could be to introduce a sample gas at a positive pressure into a vacuum chamber. Downstream from this chamber would be the SBPR and a vacuum pump. The positive pressure[…]
Go Regulator SPR
SPR Series Subatmospheric Pressure Regulator The SPR Series Sub atmospheric Pressure Regulator is designed for the introduction of a low vapour pressure reactive or purge gas into a sub atmospheric process. The large diameter diaphragm provides optimum sensitivity for sub-atmospheric or positive pressure control. Standard features allow service in many varied applications including corrosive fluids[…]
GO Regulator COM2P
COM-2P Series Crossover Manifold Regulator System The COM-2P employs two discrete single stage PR-1-type regulators built into a single body. These regulators serve as the primary and secondary changeover regulators with the common outlet port connected to a single PR-1 Series regulator. This allows for the non-stop delivery of gas from bottles with only a[…]
