Sample gas coolers are used to remove any moisture from the gas is an important step in sample gas conditioning. To achieve this, suitable coolers are applied to reduce the gas temperature below the dew point in order to condense the moisture. To secure a reproducible analysis result the dew point must remain as stable as possible even when the ambient temperature fluctuates.
Sample gas filters for gas filtration by Bühler Technologies
Sample gas filters are used to filter finer dust from your gas analyzer system. Even when the contaminants have been removed at the extraction point through effective particle filtration inside the sample gas probe, there is still a risk of finer dust entering the gas measuring system. For this reason effective analysis sample gas filters are required, but also for use in stationary or portable sample gas conditioners. These can be in-line filters or panel filters with housings made from various material combinations. Equipped with easy to change filter elements with various retention rates and an adequate filter size they can be used for a wide rang
Sample gas probes by Bühler Technologies
Sample gas probes form a critical point between process and analysis system. They extract sample gas from the process stream and supply it to the analysis system. They should already remove undesirable particulates at the sampling point and avoid cold spots thus preventing false measurements. Our probes are easy to maintain without requiring a lot of tools. Their designs are suitable for critical ambient conditions such as explosive areas and provide weather protection.
Sample gas pumps by Bühler Technologies
Sample gas analysis systems require sample gas pumps when the process pressure is not sufficient to transport an adequate volume of sample gas to the analysers reliably. The frequent corrosive and aggressive nature of the sample gas demands special properties of the material in contact with the media. The pumps can also transport potential condensate.
NOx converters by Bühler Technologies
NOx converters are used to convert NOx. In order to protect life and the environment, the emission of nitric oxides must be reduced and monitored.
Buhler MAS
The Buhler MAS system combines a 19″gas analyzer and a sample conditioning system in a rigid transport case. The conditioning components, including the cooler, filter, pump and flow meter, are customized to the application. The transport case is a double wall construction and highly shock resistant. Wheels, carrying handles and a handle for pulling the[…]
Buhler SCS19
The Buhler Model SCS Sample Gas Conditioner is a pre-engineered, pre-packaged sampling system including all pneumatic components that are normally used in gas analysis systems. The SCS integrates the following pneumatic functions: sample pump, sample cooler, calibration gas valves, flow meters, condensate drains, particulate filtration, and operator interface, PLC or data logger control features all[…]
Buhler SM6
These highly corrosion resistant flow meters are suitable for both liquid and gaseous applications. The SM-6-V combines a flow meter with a precision needle valve to regulate and adjust the flow. In applications where flow monitoring is critical, the flow meter can be equipped with a bi-stable flow sensor. Any deviation fron the set point[…]
Buhler SSM
Handling hazardous liquids or gases requires the use of flow meters with the vulnerable parts such as the metering glass protected against breakage. The S-SM safety flow meter provides sealed protection glass around the metering glass and an outer stainless steel shell with a sight window. A variety of construction materials is available to meet[…]
Buhler TGAK3
The Buhler Model TGAK 3 is a complete, portable gas conditioning system in a rugged metal case. The basic model consists of a gas cooler with condensate vessel, a gas pump, filter, moisture detector and a flow meter with needle valve. A version without the pump is also available. The TGAK features a unique fail-safe[…]
