GO Regulator PR-59 Series High Pressure Regulators
Designed for low and high pressures up to 4000 psig inlet, the GO Regulator PR-59 Series High Pressure Regulators pressure reducing regulator controls high flow with its Cv flow coefficient of 1.2. Though normally supplied without self-relieving capability, this feature can be added as an option. While primarily designed for use with gas streams, the PR-59 can be used with virtually any liquid systems that are compatible with the seals. A large size piston sensor gives good sensitivity of control even at low outlet pressures and the Kel-F® valve seat assembly gives normal bubble-tight shutoff.
GO Regulator PR-59 Series High Pressure Regulators Benefits
- 316L stainless steel, brass and Monel® body construction
- Inlet pressure capability up to 4000 psig
- Outlet control ranges from 250 psig up to 4000 psig
- Optional self-relieving feature
- Inlet and outlet ports of ½˝ or ¾˝ FNPT with ¼˝ FNPT gauge ports optional
- Balanced poppet valve design for constant pressure control
- Viton® seals (other elastomers optional)
- PCTFE seat
- Cv flow coefficient is 1.2
- Operating temperatures of -40° F to +175° F (-40° C to +80° C)
GO Regulator PR-59 Series High Pressure Regulators Maximum Temperature & Operating Inlet Pressures
Seat Material | Maximum Temperature | Maximum Operating Inlet Pressure | |
PCTFE | 175º F (80º C) | @ | 4000 psig (27.58 MPa) |
PTFE | 150º F (66º C) | @ | 1000 psig (6.90 MPa) |
GO Regulator PR-59 Series High Pressure Regulators PDF
Contact our specialist directly
You can contact us is you have a question about when it suits you. See our specialist’s contact information below.
🔧
📨
📞
🔗
Let our specialist contact you
Let us know how we can reach you to discuss . We will only use this information for contacting you.