GO Regulator COM2P

GO Regulator COM2P
GO Regulator COM2P

COM-2P Series
Crossover Manifold Regulator System

The COM-2P employs two discrete single stage PR-1-type
regulators built into a single body. These regulators serve
as the primary and secondary changeover regulators with
the common outlet port connected to a single PR-1 Series
regulator. This allows for the non-stop delivery of gas from
bottles with only a 0.01% change in outlet pressure as the
inlet pressure varies. The hardware comes mounted in an
attractive 300 series stainless steel panel that is suitable for surface mounting near the bottles. Labels are permanently silk-screened on the face of the panel for easy identification of process ports and gauges. The unit comes complete with pressure gauges and shut-off valves. Suitable for gases and liquids.


  • Complete panel system including gauges and vent valves for easy installation
  • Allows changing of cylinders during operation
  • Available in both stainless steel and brass (other materials also available)
  • Steady outlet pressure during cylinder depletion
  • 0.01% pressure control accuracy
  • Inlet pressures to 6000 psig
  • Outlet pressure ranges 0–10 psig, 0–25 psig, 0–50 psig, 0–100 psig or 0–250 psig
  • Changeover pressures: 15-250 psig
  • Cv flow coefficients 0.025, 0.06, 0.2, 0.5
  • All connections: ¼˝ FNPT
  • 20 micron sintered inlet filters
  • Teflon®-lined stainless steel diaphragm
  •  Operating temperatures: −40° F to +500° F (−40° C to +260° C)


Contact our specialist directly

You can contact us is you have a question about when it suits you. See our specialist’s contact information below.

Gertjan Mastenbroek - ASaP - Address and contact persons





Let our specialist contact you

Let us know how we can reach you to discuss . We will only use this information for contacting you.

Contact form