GO Regulator PR-50 Series High Pressure Regulators

GO Regulator PR-50 Series High Pressure Regulators

Diaphragm-type High Pressure Regulator

GO Regulator PR-50 Series High Pressure RegulatorsThe GO Regulator PR-50 Series High Pressure Regulators are designed to meet the demands for outlet pressures up to 2000 psig while maintaining superior corrosion protection. For reliability in operation, this precision regulator features a stainless steel body (optional brass) which provides maximum corrosion resistance and safety.

The optional self-relieving feature provides an additional level in operational ease, as it allows for trapped downstream pressure to be safely vented to atmosphere through the bonnet. To prolong regulator life, this unit is supplied with an integral inlet filter which protects the seat against any foreign contamination introduced by the upstream supply.

GO Regulator PR-50 Series High Pressure Regulators APPLICATIONS

  • R & D systems
  • Cylinder gas regulation
  • Sampling systems
  • Airline charging carts
  • Pilot plants
  • Off shore drillings

GO Regulator PR-50 Series High Pressure Regulators BENEFITS

  • Gas or liquid service
  • Inlet pressure to 6000 psig
  • Outlet pressure ranges 0–500, 0–1000, and 0–2000 psig
  • 316L stainless steel or brass (alloy 360) construction
  • 20 micron inlet filter
  • Bubble-tight shutoff
  • Diaphragm material standard stainless steel, nylon or Teflon®
  • Flow coefficients (Cv) of 0.025, 0.06, and 0.20

GO Regulator PR-50 Series High Pressure Regulators Maximum Temperature & Operating Inlet Pressures

Nylon Diaphragm Backing
Seat Material Maximum Temperature Maximum Operating Inlet Pressure
Tefzel® 150º F (66º C) @ 3600 psig (24.82 MPa)
High Density PTFE 150º F (66º C) @ 3600 psig (24.82 MPa)
PCTFE 175º F (80º C) @ 6000 psig (41.37 MPa)
Polyimide 175º F (80º C) @ 6000 psig (41.37 MPa)
PEEK 175º F (80º C) @ 6000 psig (41.37 MPa)

 

PTFE Diaphragm Backing
Seat Material Maximum Temperature Maximum Operating Inlet Pressure
Tefzel® 150º F (66º C) @ 3600 psig (24.82 MPa)
PTFE 150º F (66º C) @ 3600 psig (24.82 MPa)
PCTFE (formerly Kel-F 81) 175º F (80º C) @ 6000 psig (41.37 MPa)
Polyimide 350º F (176º C) @ 6000 psig (41.37 MPa)
PEEK 350º F (176º C) @ 6000 psig (41.37 MPa)

GO Regulator PR-50 Series High Pressure Regulators PDF

 

 

Contact our specialist directly

You can contact us is you have a question about when it suits you. See our specialist’s contact information below.

Gertjan Mastenbroek - ASaP - Address and contact persons

🔧

📨

📞

🔗

Let our specialist contact you

Let us know how we can reach you to discuss . We will only use this information for contacting you.

Contact form