
COM-2B Series
Crossover Manifold Regulator System
The COM-2B Series crossover manifold system uses two
PR-1-type stainless steel regulators (PR-2-type brass,
optional) built in a single body functioning as the
changeover regulators with the common outlet port
connected to a single line regulator to provide constant
unchanging supply pressure unaffected by supply source
depletion. All are mounted on a bracket complete with gauges. As the primary supply source depletes and the operating outlet pressure of the primary regulator falls below the preset changeover pressure of the secondary regulator, the secondary regulator takes over. Once this occurs, the primary regulator can be manually adjusted 1⁄8-turn counterclockwise, the secondary regulator is now the primary and the depleted supply source can be replaced.
BENEFITS
- Bracket-mounted for easy installation
- Allows changing of cylinders during operation*
- Available in stainless steel, brass and Monel®
- Steady outlet pressure during cylinder depletion
- 0.01% pressure control accuracy
- Inlet pressures to 6000 psig
- Outlet pressure ranges: 0–10 psig, 0–25 psig, 0–50 psig, 0–100 psig or 0–250 psig
- Changeover pressures: 15–250 psig
- Cv flow coefficients: 0.025, 0.06, 0.2, 0.5
- All connections: ¼˝ FNPT
- 20 micron inlet fi lters
- 316L stainless steel construction
- Teflon®-lined stainless steel diaphragm
- Operating temperatures: −40° F to +500° F (−40° C to +260° C)

Contact our spare part specialist
You can contact us when it suits you. See our specialist’s contact information below.

🔧 Inside Sales

Let our spare part specialist contact you
Let us know how we can reach you. We will only use this information for contacting you.