GO Regulator CYL-21 Series Pressure Regulators

GO Regulator CYL-21 Series Pressure Regulators
Corrosion-resistant Single Stage Cylinder Regulator

GO Regulator CYL-21 Series Pressure RegulatorsThe GO Regulator CYL-21 Series Pressure Regulators are compact cylinder regulator based on the time proven design of the PR-1 single-stage line regulators. While normally used for low and moderate flow service, optional high flow orifices are available. The standard unit is equipped with CGA connector, integral inlet filter, inlet and outlet pressure gauges and may be ordered with extra inlet or outlet ports for inlet purging, outlet relief valves or other accessory items. When used in service with toxic or explosive gases, we recommend the installation of a captured vent option. This option is a true captured vent cap and not merely a standard cap with a vent port. It comes complete with a CGA fitting and 2˝ diameter gauges.

GO Regulator CYL-21 Series Pressure Regulators benefits

  • 316L stainless steel construction (standard), Monel® optional
  • Inlet pressures up to 6000 psig
  • Electropolished body with better than 25 Ra finish in diaphragm cavity
  • 20 micron inlet filter
  • Bubble-tight shut-off
  • CGA inlet fitting
  • 2˝ diameter 316 stainless steel gauges
  • Outlet pressure ranges 0–10 psig, 0–25 psig, 0–50 psig, 0–100 psig, 0–250 psig, 0–500 psig, and 0-750 psig
  • Optional Cv flow coefficients: 0.025, 0.06, 0.20, 0.50

GO Regulator CYL-21 Series Pressure Regulators datasheet

Adobe PDF ReaderGO Regulator CYL-21 Series Pressure Regulators datasheet PDF

GO Regulator CYL-21 Series Pressure Regulators Maximum Temperature & Operating Inlet Pressures

 

Stainless Steel
Seat Material Maximum Temperature* Maximum Operating Inlet Pressure
Tefzel® 150º F (66º C) @ 3600 psig (24.82 MPa)
High Density PTFE 150º F (66º C) @ 3600 psig (24.82 MPa)
CF PTFE 175º F (80º C) @ 3600 psig (24.82 MPa)
PCTFE 175º F (80º C) @ 6000 psig (41.37 MPa)
Polyimide 500º F (260º C) @ 3600 psig (24.82 MPa)
175º F (80º C) @ 6000 psig (41.37 MPa)
PEEK 500º F (260º C) @ 3600 psig (24.82 MPa)
175º F (80º C) @ 6000 psig (41.37 MPa)

 

* Temperatures in excess of 175º F(80º C) require the use of a metal knob or the Tamper Proof option