OMA process analyzers by Applied Analytics

OMA process analyzers

Continuously measure the chemicals in a liquid or gas process stream using the future of industrial process analytics: OMA process analyzers by Applied Analytics.

OMA-300 Wall-mounted OMA Process Analyzer Eexp systems purged and pressurized using a certified air purging device

Our comprehensive range of products includes offshore and onshore service, an extensive selection of gas analysis instruments, sample conditioning, and various cabinets and houses for your instruments, tailored to meet the unique requirements of various petrochemical and cryogenic applications. We are dedicated to delivering innovative solutions that ensure accurate and efficient operations in the process industry.

What is the OMA process analyzer?

The OMA is an industrial instrument which measures a high-resolution absorbance spectrum in a continuously drawn sample from a liquid or gas process stream. Harvesting this rich data, the OMA provides real-time analytics for the process stream, including chemical concentrations, purity, and color.

  • Fast, continuous reading in under 10 seconds
  • No moving parts or consumables other than zero fluid
  • Rich trend data and customizable interface

OMA process analyzer specifications

Note: All performance specifications are subject to the assumption that the sample conditioning system and unit installation are approved by Analytical Solutions and Products B.V.


Measurement PrincipleDispersive ultraviolet-visible (UV-Vis) absorbance spectrophotometry
Detectornova II™ UV-Vis diode array spectrophotometer
Spectral Range200-800 nm
Light SourcePulsed xenon lamp (average 5 year lifespan)
Signal Transmission600 μm core 1.8 meter fiber optic cables
Other lengths available
Path LengthApplication-dependent
Sample ConditioningCustom design per application
Analyzer CalibrationIf possible, analyzer is factory calibrated with certified calibration fluids; no re-calibration required after initial calibration; measurement normalized by Auto Zero
Reading VerificationSimple verification with samples and self-check diagnostic
Human Machine InterfaceIndustrial controller with touch-screen LCD display running ECLIPSE™ Software
Data StorageSolid State Drive
Analyzer EnvironmentIndoor/Outdoor (no shelter required)
Ambient TemperatureStandard: 0 to 35 °C (32 to 95 °F)
Optional: -20 to 55 °C (-4 to 131 °F)
To avoid radiational heating, use of a sunshade is recommended for systems installed in direct sunlight.
Sample TemperatureStandard: -20 to 70 °C (-4 to 158 °F)
Optional: up to 150 °C (302 °F) with cooling extensions
Contact AAI for temperatures above 150 °C (302°F)
Sample PressureUsing standard flow cell: 206 bar (3000 psi)
Using immersion probe: 100 bar (1470 psig)
Electrical85 to 264 VAC 47 to 63 Hz
Power Consumption45 watts
Standard Outputs1x galvanically isolated 4-20mA analog output per measured analyte(up to 3; additional available by upgrade)
2x digital outputs for fault and SCS control
Optional OutputsModbus TCP/IP; RS-232; RS-485; Fieldbus; Profibus; HART;


Measurement accuracy for the OMA Process Analyzer depends on the application and stream composition. Select an application for specific accuracy.

Response Time1-5 seconds
Zero Drift±0.1 % after 1hr warm-up, measured over 24hrs (constant ambient temperature)
Sensitivity±0.1 % full scale
Noise±0.004 AU at 220 nm


Standard DesignGeneral Purpose
Available OptionsATEX, IECEx, EAC, PESO, JPN
Please inquire with your sales representative for additional certifications (CSA, FM etc.).

OMA process analyzer models

All OMA models are equivalent in function and performance with identical electronic configurations. The models vary by form factor and materials of construction, each intended for a unique use case.

The OMA Chlorine Analyzer series includes:

  1. OMA-300 Wall-Mounted Analyzer: Ideal for both indoor and outdoor applications, offering robust functionality.
  2. OMA-206P Portable Analyzer: A compact, suitcase-style analyzer perfect for field applications.
  3. OMA-406R Rackmount Analyzer: Designed for laboratory or sheltered environments, fitting standard 19″ racks.

Each model maintains identical performance capabilities but varies in form factor and construction materials, providing flexibility and convenience for various operational needs.

OMA-300 UV-VIS wall-mounted Process Chlorine Analyzer - Measure chlorine with Applied Analytics
OMA-300: Wall-mounted, ideal for industrial use.
OMA-206P UV-VIS portable Process Chlorine Analyzer - Measure chlorine with Applied Analytics
OMA-206P: Portable, perfect for field operations.
OMA-406R UV-VIS rackmount Process Chlorine Analyzer - Measure chlorine with Applied Analytics
OMA-406R: Rackmount, suitable for laboratory environments.


The OMA Process Analyzer continuously measures chemical concentrations and physical properties that can be correlated from 200-800nm (UV-Vis), 400-1100nm (SW-NIR) or 1550-1850nm (InGaAs) absorbance spectrum.

The default version of the OMA Process Analyzer is provided in a wall-mounted enclosure. The system is highly customizable including options for enclosures, wetted materials, and hazardous area classifications.

OMA-300 UV-VIS wall-mounted process analyzer YouTube demonstration video
OMA-300 UV-VIS wall-mounted process analyzer YouTube demonstration video

Physical Specifications

For performance and other specifications, visit the OMA Series.

Enclosure TypeStandard: Wall-mounted, carbon steel NEMA 4 enclosure
Options Available
Analyzer Dimensions24″ H x 20″ W x 8″ D
(610 x 508 x 203 mm)
Analyzer Weight32 lbs. (15 kg)
Wetted MaterialsQuartz, Viton, stainless steel 316L
Options Available

OMA-206P – Portable analyzer

The portable version of the OMA Process Analyzer is housed in an ultra-rugged suitcase enclosure, so you can bring analytics from site to site with confidence.

OMA-206P Portable OMA Process Analyzer YouTube video demo
OMA-206P Portable OMA Process Analyzer YouTube video demo

Physical Specifications

Enclosure TypePortable Suitcase enclosure
Material: Ultra High Impact structural copolymer
Analyzer Dimensions16.87″ H x 20.62″ W x 8.12″ D
(428mm H x 524mm W x 206mm D)
Analyzer Weight25 lbs. (11 kg)
Wetted MaterialsQuartz, Viton, stainless steel 316L
Options Available

OMA-406R – Rackmount process analyzer

The OMA Process Analyzer continuously measures chemical concentrations and physical properties that can be correlated from 200-800nm (UV-Vis), 400-1100nm (SW-NIR) or 1550-1850nm (InGaAs) absorbance spectrum.

The rackmount version of the OMA is designed for easy integration in analyzer shelters and laboratory settings. The system fits a standard 19″ rack.

OMA-406R Rackmount OMA Process Analyzer YouTube video demo
OMA-406R Rackmount OMA Process Analyzer YouTube video demo


With thousands of units shipped since 1994, the OMA-406 Rackmount Analyzer has been deployed for a wide range of applications across various industries:

Specialty gasses

The OMA-406 Rackmount Analyzer uses a dispersive UV spectrophotometer for measuring the concentrations of fluorine, chlorine, hydrogen sulfide, sulfur dioxide, ammonia and other gas mixtures from ppm to percent levels. The full spectrum analysis of the OMA-406 enables a single analyzer to be calibrated for multiple ranges and for multiple analytes. Specialty gas manufacturers can leverage the versatility of the OMA-406 to simplify quality control procedures.

Measuring F2/Cl2 in excimer laser gas mixtures

Premixed cylinders containing blends of XeF or KrCl, for example, are produced by specialty gas companies for sale to companies that operate excimer lasers. The quality of the excimer laser gas cylinders must be closely monitored during their production. In addition, the mixed cylinder must be validated, and the halogen gas needs to be quantified.

The OMA-406 Rackmount Analyzer continuously outputs both F2 and Cl2 readings, providing new measurements approximately every 5 seconds. Response time is critical in the production of excimer laser gas mixtures in order to respond to sudden changes in product quality.

Physical Specifications

Enclosure TypeSteel rackmount enclosure
Analyzer Dimensions8.75″ H x 19″ W x 12.12″ D
(222.3mm H x 482.6mm W x 307.8mm D)
Analyzer Weight20 lbs. (9 kg) minimum
Wetted MaterialsQuartz
Options Available

Explosion-Proof models

The OMA-300 is offered in two explosion-proof formats:


Eexp systems are purged and pressurized using a certified air-purging device. This method ensures that toxic/explosive gas is not allowed to accumulate inside the enclosure and is ideal when instrument air is available.

OMA-300 Wall-mounted OMA Process Analyzer Eexp systems purged and pressurized using a certified air purging device
OMA-300 Wall-mounted OMA Process Analyzer Eexp


Eexd systems are contained within certified explosion-proof cast-aluminum enclosures. This method is more practical if the installation is remote, or utilities are unreliable.

OMA-300 Wall-mounted OMA Process Analyzer Eexd systems are contained within certified explosion-proof cast-aluminum enclosures
OMA-300 Wall-mounted OMA Process Analyzer Eexd

OMA technology

Spectrophotometer Principle of Operation

To analyze the chemical composition of the sample, the OMA uses an analysis method known as absorbance spectroscopy. Depending on the target chemicals for analysis, the OMA uses either UV-Vis (200-800nm), SW-NIR (400-1100nm), or InGaAs (1550-1850nm) sensors in its spectrophotometer. The system measures absorbance across its wavelength range and quantifies the amount of light absorbed by the sample at each integer wavelength; the OMA plots this raw data to visualize a high-resolution absorbance spectrum.

OMA process analyzers Principle of Operation UV Vis NIR spectrum detector
OMA process analyzers UV/Vis/NIR spectrum detector

The key difference between a spectrophotometer and conventional photometers is that photometers use ‘non-dispersive’ methods whereby measurement wavelengths are physically isolated using filters. For measuring multiple components, this will require the photometer to employ a moving part (filter wheel) or multiple line source lamps. By contrast, our spectrophotometer is solid state and has a single light source.

OMA process analyzers spectrophotometer light source path flow cell diode array Principle of Operation
OMA process analyzers spectrophotometer light source path, flow cell, and diode array

The OMA uses a long-life xenon or tungsten light source to transmit a signal through the sample fluid in the flow cell. The signal is carried by fiber optic cables from the analyzer to the flow cell, where the chemical mixture of the sample has unique interactions with the light based on its current composition.

The path of the light signal

The measurement cycle of the nova II is virtually instantaneous, but it is helpful to explain it in stages:

  1. The white light signal originates in the pulsed xenon light source.
  2. The signal travels via fiber optic cable to the entry point of the flow cell, where a collimator narrows the light beam. The signal travels directly across the flow cell path length, interacting with the continuously drawn process sample fluid.
  3. Now containing the distinct absorbance imprint of the current chemical composition in the sample, the signal exits the flow cell on the opposite end through a collimator and travels via fiber optic cable to the spectrophotometer inside the analyzer enclosure.
  4. The holographic grating physically separates (disperses) the signal into its constituent wavelengths, focusing each wavelength onto a corresponding photodiode within the 1024-element diode array.
  5. The light intensity spectrum measured by the diode array is processed by the analyzer CPU. The absorbance spectrum is calculated and visualized by plotting lost light intensity at each wavelength due to the process sample interactions.

From xenon lamp to diode array, the entire cycle occupies a few milliseconds and involves no moving parts.

nova II Spectrophotometer

The nova II is the heart of any spectrophotometric Applied Analytics system. This device performs absorbance spectroscopy by transmitting a light signal across the path of a sample fluid via fiber optic cables. The nova II’s wavelength domain of spectral acquisition is known as UV-Vis/SW-NIR (shorthand for ultraviolet-visible / shortwave near infrared).

Applied Analytics Nova II diode array spectrophotometer
Applied Analytics Nova II diode array spectrophotometer.

Major sub-components

  1. The light source. The standard 200-800 nm model nova II uses a pulsed xenon lamp.
  2. The slit. This refers to the narrow aperture in the plate located at the focus of the spectrophotometer lens. It is exactly the size of one photodiode in the array, thus ensuring that each wavelength band is projected only onto the corresponding photodiode.
  3. The holographic grating. Physical separation (dispersion) of the received light signal and spectral imaging onto the diode array are both accomplished by the concave holographic grating. The angle in which the light is dispersed is proportional to the wavelength, such that each wavelength is differentiated and imaged onto a different point in the diode array.
  4. The photodiode array. The linear array contains 1,024 light-sensitive elements, each measuring an assigned wavelength; all the measurements occur in parallel such that the raw data comprises a complete spectral acquisition.

How the OMA detects a chemical

An absorbance curve is like a distinctive fingerprint for a chemical, determined by its unique electronic and molecular structure. The OMA uses powerful software to isolate the absorbance curve of the measured chemical from the total sample absorbance.

User Interface

Our proprietary ECLIPSE software processes the raw spectral data to provide real-time concentration readings. The operator can easily navigate between views (trend graph, spectrum, and more) using intuitive touch-screen navigation. You can also configure alarms, data logging, and outputs.

OMA process analyzers User Interface ECLIPSE software
OMA process analyzers user interface ECLIPSE™ software

ECLIPSE™ Software

ECLIPSE is Applied Analytics’ proprietary analysis software platform which provides a touch-responsive visual interface for the operator. The software processes the raw absorbance data from the detector to visualize real-time sample absorbance and output chemical concentrations.

This feature-rich interface allows for easy configuration of display settings, data logging, Auto Zero, alarms, and more. ECLIPSE also contains proprietary multi-component analysis algorithms for measuring up to 5 chemicals simultaneously.


Auto-Zero. Zeroing is a software task which measures the light source emission spectrum when a zero-absorbance fluid is in the flow cell. Any difference in light intensity from this ‘baseline’ while running on process sample will be measured as absorbance. This serves to normalize the detector reading and stabilize accuracy such that re-calibration is never required.

Alarms. ECLIPSE provides multiple configurable alarms for concentration thresholds and other process conditions.

Virtual PLC. There is no need for any PLC knowledge because this functionality is virtualized in an intuitive visual interface, where relay tasks can easily be sequenced and saved.

Trend graph. Easily adjust the historical interval to observed trends in all active measurements.

Data Logging. ECLIPSE writes concentration data as well as spectral absorbance data to log files on the solid state drive.

Multi-Component Analysis

The OMA can be configured to measure up to 5 chemicals simultaneously. The system uses a de-convolution algorithm which separates the absorbance curve of each analyte from the total sample absorbance by solving a regression matrix sourced from hundreds of diodes (one per integer wavelength).

One critical advantage of full-spectrum analysis is the ability to isolate multiple absorbance curves from the total sample absorbance. This allows us to measure multiple chemical analytes simultaneously with a single analyzer, without using filters or moving parts.

Concept Multi-Component Analysis OMA Process Analyzer YouTube video demo
OMA Process Analyzer YouTube video demo – AAI Explains Multi Component Analysis

Detailed explanation

Let’s look at the example of measuring H2S and SO2 simultaneously: We can isolate the curve of H2S from the total sample absorbance spectrum. This is extremely useful for background correction — when lurking components in the process stream have overlapping absorbance with the target analyte. The high-resolution raw data allows for de-convolution of up to 5 chemical species, meaning that the OMA can be optionally configured to monitor additional chemicals.

Multi-Component Analysis OMA Process Analyzer measuring H2S and SO2 simultaneously
Multi-Component analysis.measuring H2S and SO2 simultaneously.

As illustrated above, each measurement wavelength contributes an equation to a matrix which is continuously solved by the ECLIPSE multi-component algorithm. Due to the resolution of the spectrophotometer, this procedure isolates the absorbance curve of H2S with very high accuracy and is not susceptible to cross-interference. Each equation takes the form:

A’(x+y) = A’x + A’y = e’xbcx + e’ybcy

Where A’ is the absorbance at wavelength ‘, e’ is the molar absorptivity coefficient at wavelength ‘, c is concentration, and b is the path length of the flow cell.

For example, the equation for measuring H2S and SO2 simultaneously at wavelength 225 nm:

A225′(H2S+SO2) = A225′H2S + A225′SO2 = e225′H2SbcH2S + e225′SO2bcSO2

The OMA’s ECLIPSE™ Software continuously solves a matrix of these equations sourced from all measurement wavelengths simultaneously to produce an extremely accurate analysis. False positives and cross-interference are eradicated by the statistical averaging effect of using so many confirmation wavelengths.

Photometers that offer multi-component analysis will often use crude techniques like rotating “chopper” filter wheels or a group of line source lamps. These solutions implement moving parts that are prone to malfunction and multiple light sources that all require replacement, while delivering inferior accuracy.

Through the power of rich data, the OMA provides robust multi-species measurement using a solid-state design and a single light source.

Inherent Safety

Most analyzers draw the process sample directly into the analyzer enclosure for analysis, which is dangerous if the sample fluid is toxic, explosive, or corrosive. The OMA design is unique: we bring the light to the sample, not the other way around. The sample circulates through the external flow cell, which receives the signal via fiber optic cables.

The major safety flaw of many process analyzers is that they bring toxic sample fluid into the analyzer enclosure for analysis. Not only does this expose system electronics to higher corrosion effects, it also poses a lethal threat: if there is any leak in the instrument, especially inside a shelter, the human operator is placed at enormous risk.

Applied Analytics design centers on inherent safety. The key difference between our instruments and other process analyzers is the use of fiber optic cables and external flow cells: we bring the light to the sample instead of bringing the sample to the light. The toxic sample fluid is only required to circulate through the dedicated flow cell, and never enters the analyzer electronics enclosure.

Concept Analyzer Safety OMA Process Analyzer YouTube video demo
OMA Process Analyzer Safety YouTube video demo – The world’s safest process analyzers

Sampling system for Process gas analyzers

The OMA is built for direct analysis of the hot/wet sample, thus simplifying the scope of the sample system and retaining high sample integrity. From our vast experience in sampling design, we know that applications can be similar but are rarely identical. For this reason, we design and build sample conditioning systems on a project basis, working from the process to the drawing board.

Sampling system for ABB Advance Optima AO2040 gas analyzer and SHS or SCS for process conditions control
Sampling system for ABB Advance Optima AO2040 gas analyzer and SHS for process conditions control

Need help choosing analyzer solution?

FAQ: Answering questions about OMA process analyzers

Do the OMA process analyzers measure chemical concentrations?

The OMA can simultaneously monitor up to five chemicals in the sample stream. All analytes must have distinct absorbance curves in the wavelength range of the OMA. Search for a measurement

Do the OMA process analyzers measure chemical purity?

By measuring a high-resolution transmittance spectrum, the OMA can very precisely detect impurities in the sample fluid by sudden changes in the spectral structure.

Do the OMA process analyzers measure physical properties?

Various properties such as the heating value of a fuel or the octane of a gasoline blend can be powerfully correlated to the absorbance spectrum of the sample.

For which applications can OMA process analyzers be used?

The OMA is used to measure hundreds of different chemicals across various industries. The instrument is versatile because it acquires a full absorbance spectrum — and many chemicals have absorbance features in that region. Search for an application

OMA process analyzer measurements

The OMA can simultaneously monitor up to five chemicals in the sample stream. All analytes must have distinct absorbance curves in the wavelength range of the OMA.

AnalyteChemical Formula
acetic acidCH3CO2H
acetic anhydride(CH3CO)2OAc2O
acetyl chlorideCH3COCl
amyl alcoholC5H11OH
aromatic hydrocarbons
benzoyl chlorideC6H5COCl
benzyl chlorideC7H7Cla-chlorotoluene
carbon disulfideCS2
carbon tetrachlorideCCl4Freon; Halon 104
carbonyl sulfideCOSOCS
chlorine dioxideClO2
chloromethaneCH3Clmethyl chloride
chromium ionsCr6+
color of process
copper ionsCu2+
diacetone alcoholCH3C(O)CH2C(OH)(CH3)2
dimethyl sulfide(CH3)2SDMS; methylthiomethane
dimethyl terephthalateC6H4(CO2CH3)2DMT
diphenyl(C6H5)2biphenyl; phenylbenzene
ethyl bromideC2H5Brbromoethane; EtBr
ethylene chlorohydrinHOCH2CH2Cl2-chloroethanol
ethylene glycolC2H6O2MEG
ethyl mercaptanCH3CH2SHethanethiol; EtSH
ferric chlorideFeCl3iron(III) chloride
ferrous chlorideFeCl2iron(II) chloride
ferrous sulfateFeSO4iron(II) sulfate
formaldehydeCH2Omethyl aldehyde
formic acidHCO2Hmethanoic acid
hydrogen iodideHIiodane
hydrogen peroxideH2O2
hydrogen sulfideH2S
hydroquinone monomethyl etherC7H8O2MeHQ
hypochlorous acidHClOchloric(I) acid
lithium bromideLiBr
lithium iodideLiI
maleic anhydrideC2H2(CO)2O
manganese sulfateMnSO4(H2O)
mesityl oxideCH3C(O)CH=C(CH3)2
methanolCH3OHmethyl alcohol; MeOH
methyl butyl ketoneC6H12O
methyl ethyl ketoneCH3C(O)CH2CH3MEK; butanone
methyl formateC2H4O2methyl methanoate
methyl iodideCH3Iiodomethane; Mel
methyl isobutyl ketone(CH3)2CHCH2C(O)CH3MIBK
methyl mercaptanCH3SHmethanethiol; MeSH
2-methyl-1, 3-butadieneCH2=C(CH3)CH=CH2
4-methyl-1, 3-pentadiene(CH3)2C=CHCH=CH2
monochloroacetic acidClCH2CO2HMCA
monovinyl acetylene
nickel carbonylNi(CO)4nickel tetracarbonyl
nickel sulfateNiSO4(H2O)6
nitric acidHNO3aqua fortis
nitrogen dioxideNO2
nitrogen tetroxideN2O4
nitrogen trichlorideNCl3trichloramine
oxalic acidH2C2O4
perchloroethaneC2Cl6PCA; hexachloroethane
phenolC6H5OHcarbolic acid; phenic acid
phosgeneCOCl2carbon dichloride oxide
phthalic acidC6H4(CO2H)2
phthalic anhydrideC6H4(CO)2O
propionic acidCH3CH2COOH
sodium chlorateNaClO3
sodium hydrosulfiteNa2S2O4sodium dithionite
sodium hypochloriteNaClO
sodium nitrateNaNO3nitratine
sodium nitriteNaNO2
sodium sulfideNa2S
sodium sulfiteNa2SO3
styreneC6H5CH=CH2vinyl benzene
sulfur dioxideSO2
sulfur monochlorideS2Cl2disulfur dichloride
sulfur oxychlordeSOCl2thionyl chloride
sulfur oxychlordeSOCl2thionyl chloride
tetrachloroethyleneC2Cl4perchloroethylene; perc
titanium tetrachlorideTiCl4
tolueneC7H8toluol; phenylmethane
trichloroethyleneC2HCl3TCE; trichlor
uranium hexaflourideHF6hex
uranyl nitrateUO2(NO3)2
vanadium ions
OMA process analyzers by Applied Analytics measurments table.

OMA process analyzer applications

The OMA can simultaneously monitor up to five chemicals in the sample stream. All analytes must have distinct absorbance curves in the wavelength range of the OMA.

acetonitrileApplication Notepurity
acid gasApplication NoteH2S
airplane deicingApplication Noteglycol
alcoholic spiritsApplication Noteethanol
ammonia slipApplication Noteammonia
biogasApplication Notehydrogen sulfide
black liquorbenzene
catalyst pre-sulfidingApplication Notehydrogen sulfide
caustic treatingApplication Notecarbon dioxide
CEMSProduct Pagemanycontinuous emissions monitoring
Clean-in-PlaceProduct Pageactive ingredientCIP
chlorine dioxide productionApplication Notechlorine dioxide
CMP slurryApplication Notehydrogen peroxide
carbon dioxide recycleApplication Notehydrogen sulfide
dimethyl sulfide
cooling waterApplication Notehydrogen sulfide
crude oilApplication Notehydrogen sulfide
decaffeinationApplication Notecaffeine
DeNOXApplication NoteNOX
dieselApplication Notejet fuel
ethylene dichlorideApplication Notechlorine
ferric chloride
carbon dixoide
carbon monoxide
electroplatingApplication Notemetal ions
feed forwardApplication Notehydrogen sulfide
feed gasApplication Notehydrogen sulfide
flareApplication Notehydrogen sulfide
sulfur dioxide
flue gasProduct Pagemany
fluorinatorApplication Notefluorine
gasolineApplication Noteblending analysis
hydrogen recycleApplication Notehydrogen sulfide
jet fuelApplication Notediesel
landfill gashydrogen sulfide
lean amineApplication Notehydrogen sulfide
carbon dixoide ammonia
liquefied natural gasApplication Notehydrogen sulfideLNG
liquefied petroleum gasApplication Notehydrogen sulfide
odorant / mercaptans
MEGApplication Notepurityethylene glycol
naphthaApplication Notehydrogen sulfide
natural gasApplication Notehydrogen sulfide
odorant / mercaptans
carbon dixoide
carbon monoxide
pipeline gasApplication Notehydrogen sulfide
odorant / mercaptans
carbon dixoide
carbon monoxide
pre-SCRApplication NoteNOX
propaneApplication Notehydrogen sulfide
odorant / mercaptans
rich amineApplication Notehydrogen sulfide
carbon dixoide ammonia
sales gasApplication Notehydrogen sulfide
odorant / mercaptans
carbon dixoide
carbon monoxide
scrubber outletApplication Notehydrogen sulfide
odorant / mercaptans
seawaterApplication Notehydrogen sulfide
semiconductor etchingApplication Notehydrofluoric acid
sour gasApplication Notehydrogen sulfide
carbon dixoide
stack gasProduct Pagemany
stripped sour waterApplication Notehydrogen sulfide
sulfur pitProduct Pagehydrogen sulfide
sulfur dioxide
sweet gasApplication Notehydrogen sulfide
syngasApplication Notehydrogen sulfide
tail gas (Claus)Product Pagehydrogen sulfide
sulfur dioxide
carbonyl sulfide
carbon disulfide
air demand
titanium oxide pigment productionApplication Notetitanium tetrachloride
total sulfurApplication Note
vinyl chlorideApplication Notechlorine
ferric chloride
carbon dixoide
carbon monoxide
vitaminsvarious vitamins
wastewaterApplication Notehydrogen sulfide
wellheadApplication Notehydrogen sulfide
OMA process analyzers by Applied Analytics application table.

Is the OMA process analyzer suitable for your process?

Contact our OMA process analyzers specialist directly

You can contact us is you have a question about OMA process analyzers when it suits you. See our specialist’s contact information below.

Hans-Peter Visser - ASaP - Address and contact persons





Let our OMA process analyzers specialist contact you

Let us know how we can reach you to discuss OMA process analyzers. We will only use this information for contacting you.

OMA process analyzers practical solutions

With OMA process analyzers ASaP offers practical total solutions. The well-established and complementary ASaP analytical package of services and products is an important contribution to the right solutions for your analytical needs. Moreover, the team spirit and the cooperation with specific partners give us the opportunity to design, build, locally install and commission tailor made sample probes, analyzer systems and shelters for you. All these products and systems can be built according to the latest industry guidelines and certifications.

ASaP is the reputable provider of analytical solutions; We can provide you with a full-service package for including engineering, manufacturing, software development, offshore service, gas analyzers, system integration, and cutting-edge bio-LNG or LNG Custody Transfer Systems (CTMS), LNG Probe-Vaporizers, advanced LNG Sampling Systems, and precise natural gas analysis systems. You are kindly invited to consult our team about OMA process analyzers or any analytical challenge!

Other links Related to OMA process analyzers